Modular Steel Wheel Bolts

[maxx16v]

Any pointers ?
acquired a set modular steel wheels and refurbed them but stuck on what bolts will fit to a T6.1 .
Will the standard ones I am taking off the alloys fit or where do I get ones that fit ?
Thanks in advance

 

[manfrotto]

You will need to get different bolts depemding on the wheels (there are a few different shapes of mating surface)
EG:

 

[DXX]

Any pointers ?
acquired a set modular steel wheels and refurbed them but stuck on what bolts will fit to a T6.1 .
Will the standard ones I am taking off the alloys fit or where do I get ones that fit ?
Thanks in advance

What does the wheel manufacturer / dealer say?

 

[maxx16v]

ok...its looking like the flat bolt profile is going to suit as there is no taper on the holes
where do I get the flat bolts ?

 

[maxx16v]

not marked on the box other than 8x17 and load rating then 5x120 and 3200kg stamped on wheel

 

[DXX]

not marked on the box other than 8x17 and load rating then 5x120 and 3200kg stamped on wheel

You’re willing to put your safety at risk for some unidentifiable wheels?

 

[maxx16v]

they would no be produced if they were not safe...and they weigh in the region of 25/30kg each without the Cooper 235/65/17 all terrain tyres I will be fitting to them...will get more details from the boxes they were in tomorrow and post but all run true on a tyre balancer prior to me sanding them down

 

[manfrotto]

Check with the tyre guy when you are getting the tyres fitted and show him/her the existing bolts to see if they are compatible.

 

[maxx16v]

cant see them being compatible as they are from the standard alloys with a tapered bolt seat where as the steel wheels are just flat holes

 

[JumpShip]

Ask the manufacturer