Lazer Light question.

[dave_b]

T6.1
No auto headlight switch. No front fogs.
Can the laser lamps be fitted to be DRL on dipped and then full on with Main beam?

 

[Kind of Blue]

T6.1
No auto headlight switch. No front fogs.
Can the laser lamps be fitted to be DRL on dipped and then full on with Main beam?

Curious, which particular LAZER Lamp are you considering? They do some that aromatically reduce light output when they detect oncoming vehicles and vehicle going the same way. They provide some light on dipped eventually very little, reigniting as the road clears from memory.

https://www.lazerlamps.com/triple-r-1250-elite-with-intelligent-low-beam-assist.htmlhttps://www.lazerlamps.com/triple-r-1250-elite-with-intelligent-low-beam-assist.html

Linear-18 Elite with i-LBA

Combination of 48 high efficiency LEDs deliver exceptional lighting performance Low Beam Assist mode provides superior short/mid-range visibility Integrated photoelectric sensors detect oncoming traffic and obstacles so that light output responds to surroundings in Low Beam Assist mode 5000K LED...

www.lazerlamps.com

Glide

Introducing Glide, the world’s first ‘formed’ LED light bar. Featuring a monocoque lens construction for highly weight-efficient inherent strength and robustness, Glide is a range of 20” curved light bars that deliver so much especially when considering their ultra low-profile design. The...

www.lazerlamps.com

 

[Sasquatch]

I think the Triple R 750 has a marker light function, or similar, in addition to the full output setting.

That being the case, if you can identify the wiring to activate the necessary relays then it could be wired as Dave suggests.

I have the ST4 Evo on mine so it was simple plug and play with the supplied loom, so I couldn't advise on the exact wiring required.

 

[dave_b]

I watched this. But that van is a higher spec than mine. Hence the questions about my specific setup.

 

[dubber36]

If you are getting the Lazers with the position lights, they can be triggered by whatever feed to decide the connect them to.