Kombi board (SWB full height rear quarter ply) template

[Wickzter]

Bit of advice sought before I commit to cutting ply- I have made myself a template for what I believe is called a Kombi board, or a full height rear quarter ply board for my SWB T6. I'm a bit unsure about where I have finished it on the left side, it's basically flush with the vertical structure of the van (C pilar), is this right or should it overlap the C pilar some how?



Thanks in advance folks.

 

[T6Ollie]

Does this help? It’s the only photo I can find in my library

 

[Wickzter]

Does this help? It’s the only photo I can find in my library

View attachment 313607

Thanks @T6Ollie that's pretty much what I thought, although I don't have anywhere to fasten to on the C Pillar side as your images indicate, maybe that's a difference between a straight T6 and a Kombi. I might glue a bit of timber to the side of C pillar to stop the panel pushing in.

 

[Skyliner33]

Thanks @T6Ollie that's pretty much what I thought, although I don't have anywhere to fasten to on the C Pillar side as your images indicate, maybe that's a difference between a straight T6 and a Kombi. I might glue a bit of timber to the side of C pillar to stop the panel pushing in.

There is a bracket that goes in the c pillar to attach the board to. I might have a spare one in the garage. But only pence from VW.

 

[Wickzter]

There is a bracket that goes in the c pillar to attach the board to. I might have a spare one in the garage. But only pence from VW.

Thanks @Skyliner33, I'll ask the guys that are fitting my pop top, maybe they'll have some or I'll try my local dealers.

 

[Skyliner33]

Thanks @Skyliner33, I'll ask the guys that are fitting my pop top, maybe they'll have some or I'll try my local dealers.

K

Thread 'Rear Panel C-pillar Brackets'

4 May 2020

Hi all,

Just wondering if you can buy the bracket that the panel attaches to (picture below) or if I need to make something. Cheers Kev

• Kev_
• 7h0867735 c-pillar
• Replies: 20
• Forum: Interiors, Seating, Lining

 

[T6Ollie]

I actually damaged one and had to replace it, got it online somewhere. They are attached to the van with a rivet- I think for a panel van you need to drill the holes for the rivets, 2 each side

 

[airhoguk]

Van Parts Direct |VW Transporter 2003-Present Mounting Bracket 7H0867735A| Genuine VW Commercial Parts

Genuine VW Van Commercial Parts | Cheaper than main dealerships | All parts have a VW Warranty | Shipped direct to your door

vwvanpartsdirect.co.uk