Key Fob Re-programming

[Normski67]

Hi everyone.. first post, so be gentle.. been looking on here for a while as I was in the process of purchasing my VW and have to say the advice and chat is 1st class.

With that in mind I have now got my vehicle, a Caravelle T6 2016 Executive, and am trying to find out some info regarding the re-programming of the key fobs.

My van has the electric tailgate and electric mirrors but these will not close/fold when I use the key fob to lock it. The tailgate will open from the fob, but not close, which seems a bit weird to me and you can only fold mirrors using the switch inside the cab. I have just spoken to a local garage about getting the fob re-programmed and they told me it depends what door ‘module’ you have, but how do I find out this info..?. If anyone can help would be appreciated or any other advice in this area.. I have looked through some of the history on here regarding this issue, but thought I would try for myself.

 

[Robert]

Desired functionality can be achieved by adjusting your coding. Have you got VCDS?

 

[Normski67]

No, have not got VCDS..?

 

[Robert]

Carista, OBDeleven?
Or anybody local with any of these?

 

[R8N XX]

I have Carista

 

[Tsixty]

I had to do tailgate close from key fob with OBDEleven, couldn't find the option anywhere in Carista. Also I didn't think that 2016 model could be coded to do mirror fold from key fob, or did i imagine that?

 

[Robert]

How To Program Folding Mirrors - Pictogram

Firstly plug in your VCDS cable. The socket is just below and to the right of the steering column above the accelerator pedal. Then plug the USB end into your PC and start the VCDS application. If this is your first time using the software select Options Then [Test] to make sure the...

www.t6forum.com

 

[Tsixty]

How To Program Folding Mirrors - Pictogram

Firstly plug in your VCDS cable. The socket is just below and to the right of the steering column above the accelerator pedal. Then plug the USB end into your PC and start the VCDS application. If this is your first time using the software select Options Then [Test] to make sure the...

www.t6forum.com

From the same thread:
If it is mid 2017 onwards (ie an MY18 model) then it should do it as standard
If it is mid 2017 or earlier then its probably got the Q door modules and will not work.

 

[Normski67]

Thanks everyone for all your inputs, it’s very much appreciated but being new to this game a lot of your advice/suggestions means nothing to me..!!
all I can add is that the van was 1st registered in Oct 2016. I believe it has the comfort function as windows open and close with a long press of the fob.. the thing I find really odd like I said is that the tailgate opens with the fob, but won’t close, the indicators flash but nothing happens.. sorry for the lack of technical knowledge.. Hence why I’m reaching out to you guys..

 

[Tsixty]

That's just how the electric tailgate is from the factory. It can be altered to add close from the keyfob using specific software to alter the vehicle configuration. This is what VCDS, Carista (maybe) or OBDEleven can do. No-one knows why VW choose not to include the feature as standard.

 

[Normski67]

Just an update on this query..

Does anyone have or can recommend anyone who has the correct equipment/software that might be able to check wether this is possible to upgrade, in the Portsmouth or surrounding area..?

Thank you..

 

[Niknak]

It’s always worth sticking your head in at any motability companies you might have local, I known a couple lads that work at one and they are have come across most things wiring wise when adapting vehicles for their clients and won’t rip you off

 

[ArtD]

How To Program Folding Mirrors - Pictogram

Firstly plug in your VCDS cable. The socket is just below and to the right of the steering column above the accelerator pedal. Then plug the USB end into your PC and start the VCDS application. If this is your first time using the software select Options Then [Test] to make sure the...

www.t6forum.com

@Robert, I have programmed new BCM with key fobs but these work only to open door, no closure function works for both fobs. Any idea why? thx

Ok I managed to sort key programming. The guide is not stright forward as it should be as follows:
1. with ignition on turn on vcds
2. go to 09 Central Electronics module>Adaptations
3. chose channel 00 'Read' then 'Save'
4. chose channel 01 'Read' then new value '0' (using buttons rather than typing) press Test and then Save - the message should appear that it has been saved on Channel 1
5. press open on your key fob which is in ignition - vcds screen would recognise it.
6. Exit vcds
7. Switch off the ignition
8. Test the fob
9. Do exactly the same with next fob - using '0' value and follow with any other fobs too.

 

[indy4x]

I have a T6, build sheet says it was born Oct 2018 but wasn't registered until 2019.

I only have 1 remote, popped into my local Timpsons to see if they could supply and code an additional remote and their system said yes. Unfortunately the guy doing the key coding was unable to get the new fob coded to the van.

I hooked up VCDS when I got home and ran the through the step posted by @ArtD and I can access

09 Central Electronics module>Adaptations, choose channel 00 and it reads OK.



I then went to channel 01 and it errored



Is this because my van is one that can't have key fobs coded via VCDS or is it something else?

 

[mmi]

I have a T6, build sheet says it was born Oct 2018

That's a model year 2019 van. On this keyfob coding is not possible with VCDS.

 

[indy4x]

@mmi thats what I expected, spent some time last night on Ross Tech and various other forums researching

 

[mmi]

@mmi thats what I expected, spent some time last night on Ross Tech and various other forums researching

Key adaptation not working

Hello Members. I replaced my BCM on a Vw T5,1 Caravelle to a 7E0 937 090 D BCM PQ25 Max4 H82 0762 I cleared the stored data from the BCM and when attempting to code my keys VCDS says Chanel not available. Are my only option is the dealer coding? Saturday,01,August,2020,11:52:12:36108 VCDS --...

forums.ross-tech.com

Post in thread 'BCM upgrade'

1 Feb 2022

T6 uses the following BCMs:
7E0 937 090
7E0 937 090 B
7E0 937 090 C
7E0 937 090 D
7E0 937 090 E

Last 2 variants D & E can't have remote control paired via simple VCDS adaptation process.
C variant seems to be the best choice but B also provides the same retrofitting capability.

• Robert

•