Instrument cluster failure

m3wood

New Member
Hi all

I seem to have an instrument cluster failure on my 2018 T6. The battery, fuel and right indicator stay on dimly and then if I plug my seatbelt in goes away. They will then return if I indicate left or use the cruise control.

Does anyone know where I could get a repair done? I’m based in Norfolk.

Any suggestions on how to confirm it’s the cluster at fault would be appreciated
 
Honestly I'd look at putting a digital dash in or buy second hand clocks and with the help of the digital dash install videos swap the motherboard over
 
Had the cluster on mine (T5.1) repaired by Cluster Repairs UK in Waltham Abbey a few years ago. I assume they would be able to do a T6 as well. Took a couple of weeks in all. Give them a call and see what they say.
 
I've fitted many a DigiDash over the top of damaged or failed clusters. The CANBUS data is always in tact. Dodgey LCD's, malfunctioning needle servos, cracked front screens. None of that is needed for the DigiDash. Don't throw good money after bad when it could be money well spent towards a significant upgrade
 
I've fitted many a DigiDash over the top of damaged or failed clusters. The CANBUS data is always in tact. Dodgey LCD's, malfunctioning needle servos, cracked front screens. None of that is needed for the DigiDash. Don't throw good money after bad when it could be money well spent towards a significant upgrade

Any recommendations on a reliable Digital dash ?
 
Back
Top