I think I have killed my DRL's

Malone

Member
I installed a split charger relay and battery over the weekend as well as a double swivel base but since then my LED headlight DRL's have stopped working along with interior lights.

Nothing springs to mind that went wrong but unable to locate the fuse even with the help of the Fuse PDF's in the download section :( Would really appreciate if someone could point me in the right direction.
 
Start with fuse 5 in the lower dash fusebox counting up from the bottom left
 
Swapped fuse and it blew straight away. so, I isolated my Ablemail Battery - Battery charger and the fuse doesn't blow. Will contact the supplier of the Charger to see if he has any ideas? Cant see why it would do it.
 
Does sound rather strange !

Have you changed DRLs and/or interior lights to LED ?
 
DRL's are standard within the LED headlights, I have changed the cab lights too LED's but that was all working fine until I fitted the split charger, very simple wiring so finding it strange as to why it interferes/blows the fuse.
 
Went out to the van this morning and fuse has blown again so must have been coincidental removing the the fuse to B2B charger, is it possible that the wiring that is under the double front seat has anything to do with interior lights? as this is the only other wiring that I have moved as I fitted a double base swivel so I tucked the plugs as instructed to the little well near the handbrake and to the best of my knowledge I haven't trapped anything or maybe I have?
 
hmmmm forget the important bit at the end of the job INSULATION... it does amaze me, the slack work that can lead to a serious fire..
 
Really disappointed to be honest with a good few aspects of the work done, dreading what else I'm going to find :( I have an ever growing snag list but I like to think I will get it all resolved amicably.
 
Back
Top