Hi all,
Looking for some help with a 2022 T6.1 and a CTEK D250SE install.
I’ve been trying to find a clean ignition‑live feed for the CTEK IGN wire. I originally used Fuse 40, then tried Fuse 47, but both behave inconsistently. Sometimes the CTEK shows the orange IGN light when I unlock the van, sometimes only when I turn the key, and sometimes not at all. It also drops out a couple of seconds after removing the key.
The bigger issue is that the van’s starter battery now appears to be dying. I charged it for nearly 24 hours, drove a couple of miles, came home, and the van wouldn’t start again. The engine‑management light also came on when the battery voltage dropped.
At this point I’m trying to work out:
- Is this just a failing starter battery causing all the weird behaviour?
- Has anyone found a reliable ignition‑only feed on the T6.1 interior fuse panel?
- Do VW dealers replace the starter battery under warranty if it’s failing?
- And will they refuse to touch anything related to the CTEK wiring?
Any advice from people who’ve fitted a DC‑DC charger to a T6.1 would be massively appreciated.
Looking for some help with a 2022 T6.1 and a CTEK D250SE install.
I’ve been trying to find a clean ignition‑live feed for the CTEK IGN wire. I originally used Fuse 40, then tried Fuse 47, but both behave inconsistently. Sometimes the CTEK shows the orange IGN light when I unlock the van, sometimes only when I turn the key, and sometimes not at all. It also drops out a couple of seconds after removing the key.
The bigger issue is that the van’s starter battery now appears to be dying. I charged it for nearly 24 hours, drove a couple of miles, came home, and the van wouldn’t start again. The engine‑management light also came on when the battery voltage dropped.
At this point I’m trying to work out:
- Is this just a failing starter battery causing all the weird behaviour?
- Has anyone found a reliable ignition‑only feed on the T6.1 interior fuse panel?
- Do VW dealers replace the starter battery under warranty if it’s failing?
- And will they refuse to touch anything related to the CTEK wiring?
Any advice from people who’ve fitted a DC‑DC charger to a T6.1 would be massively appreciated.