Wanted Coilovers for T32

dorisdigler

New Member
VIP Member
Hi All,

Looking at getting some coilovers for a 6.1 T32.

Don’t want super low as will be running 20inch wheels.

What’s about?
 
We have many options all new, nothing if you are after second hand. NSL, Bilstein, our own Bilstein range, as welll as Kw. I would stay away from Older setups like the H&R as tech as moved on massively since then, even the original B14’s have better options own. And as always we have demo vehicles to try before you buy. Dont get talked into being told something is the best, and then a couple do months later you have to change again. Very common practise unfortunately.
 
Entertaining comments as always !!

Top conversion companies like "Van Haven" have used everything the industry has to offer , They sell our Latest ( and Greatest ) H&R Coil over kit which has kept up with technology more so that any other supplier in reality and its reputation speaks for itself . Look up some of their latest videos on the matter .
The picture below shows a typical day at our facility and 3 of the well know coil over kits were removed. .
Recommendations
Phone around get to know the suppliers and their capabilities , ask lots of questions , this is a costly mistake to make , You dont need a test drive but make sure you get a guarantee that if the kit doesn't suit you it will be removed. A Demo van might feel ok , but the kit might not be good in your van . . Ask the question it wont hurt , but if they wont remove it be cautious to commit .

There are of course lots of technical detail with these kits , Damping forces and spring rates are very important to the suspension gurus but you dont need to worry about them . What you do need to worry about is buying a quality kit that is properly designed , Shorter Strut lengths, A R B brackets in the correct place and small diameter springs that wont puncture the tyre if they break . These are all common issues on many Transporter suspension kits .

Bad Bilstein Day  2.webp

Bad Bilstein Day.webp
 
I have a set of stance coil overs off of a t32 t5.1 that I don’t need if you’re interested
 
 
Back
Top