Sold ABT CR 20 Wheels & Tyres

[Montecha]

For sale is my set of 4 x ABT CR 20 wheels.

I’ve used them for around 5,000 miles, having bought them ‘as new’ from the Forum at the beginning of the year, so about 5,600 miles total use. They are in great condition without any scrapes or marks.

They are fitted with Nokian Z-Line Tyres 275/35/20 102V. To be clear theses tyres are not suitable for a T32 – as a T32 needs 103 Load Rating (or above). Good tread - no tyre damage.

The ABT Rims are 20 x 9J and ET45, PCD 5 x 120 i.e. direct fit. They do fit really well, I’m lowered -50mm with only a tiny rub on the wheel arch plastic on full lock.

The reason for sale is that I have a T32 Kombi and had to do something about the load rating and don’t want to go up to 275/40/20 tyres to get 103+ rating, particularly with the DSG box while it’s still in warranty. So dropped down to some baby Sportline 18’s for the time being.

This is the picture from Ferrett99 when I bought them. I will get them out this weekend and take individual pics and list the respective tread depths.

Tyre depths are as follows.

Outside to inside, 6-6-6, 6-5-5, 7-6-6 and 7-6-6.

Looking for £895.

 

[Montecha]

Got them out for a clean up in the sun today.

 

[dubhead]

Hi,

Interested!

Any pictures of the wheels fitted to the van with your 50mm lowered suspension?

Thanks

 

[Montecha]

A couple of not very good ones.

 

[Keaney]

Hi are these sold?

 

[Montecha]

Currently still available.

 

[PukkaT6]

Really nice them

 

[DavRob]

They are similar to the Audi SQ5 wheels I have been debating for my van. Have you lowered your van if so by how much ? Also whereabouts are you?

D

 

[RattyMcClelland]

Have you lowered your van if so by how much ? Also whereabouts are you?

D

Hi,

Any pictures of the wheels fitted to the van with your 50mm lowered suspension?

Thanks

Best wheels. Heavy buggers though.

 

[Montecha]

Van is on -50mm Eibachs and I'm near Reading, Berks.

 

[crackon]

This may help @Montecha sell his wheels.....some T32s can run 275/35/20 102V tyres, it will depend on the axle load requirements. A lot need 103s and therefore will require 275/40/20s as stated. There is a useful article and set of charts here Van Adz - Changing Tyre Size which explains fully and the photo of the load plate (if you hover over it) is taken from a T32 Kombi requiring 840kg per tyre.

 

[chriscroft]

This may help @Montecha sell his wheels.....some T32s can run 275/35/20 102V tyres, it will depend on the axle load requirements. A lot need 103s and therefore will require 275/40/20s as stated. There is a useful article and set of charts here Van Adz - Changing Tyre Size which explains fully and the photo of the load plate (if you hover over it) is taken from a T32 Kombi requiring 840kg per tyre.

Is the difference in maximum axel loads: T5-T32 v T6-T32??

 

[crackon]

It may well be, but may be more complicated than that and may be affected by the options you choose, some T32 T5's are within the 102 threshold (my last one was 1680kg) and some require 103s, my current T6 T32 is 1720kg so 103 but others may be different. I think the bottom line is check your axle load plate as that is the only way to be sure and that is what the authorities will go by.