Search results for query: H4 bulb

For clarity… The LED headlight units that have non-replaceable ‘bulbs’, in other words fixed LEDs soldered in place, should be legal (assuming they have genuine accreditation). Headlight units that are designed to take replaceable LED ‘bulbs’ - whether H7, H4 etc. are not road legal despite what...

Try the search function and there will be an extensive thread on the drl holder issue and solution.....

Having a sort out prior to having our house renovated so need some space. The suspension was replaced at 50k miles. Rear shocks are corroded on outer tubes but are fine mechanically. Fronts fine. Springs included with both. H4 Headlights were replaced around the same time. Fitted with LED...

Just fitted these to my T6 mine has the H4 bulbs, they are quite a bit brighter as you will see in the following pics, and just to advise when changing the drivers side remove the air filter box to save time and frustration, took only couple of minutes to take airbox off and then it's so easy to...

Upgraded my T6 with single headlights H4 bulbs to Phillips +60% and a useful upgrade over the standard . But is it legal to fit a non matched pair as thinking of fitting a Phillips +200% to the near side and keeping the +60 on the offside . Wanting to maximise the up while minimising the dazzle...

Upgraded to THQ V3s, so have a pair of 2017 H4 lights going spare. Great condition, includes bulbs. Free to anyone who can pickup from North Bristol.

Lights look H4 and you've used H4 bulbs so theyre H4 despite what any doc says. As for the connectors doubt its towbar or HU. Try tracing the wire back. Where does it go? Or a pic if possible.

Cheers for info.

Looks like you’ve got yourself a H7 headlamp there rather than the standard H4 one. Your best bet would be to try and get hold of another H7 for the other side. They are much, much better than the standard H4 headlights. They do need some simple coding so the dipped beam stays on with the main...

...which are about 1700 lm and probably around 15-16W The output isn't great - I don't think it's significantly improved over the stock H4 bulb setup. Looking at some of the upgraded bulbs, probably all out of the same Chinese factory, there are options which are apparently designed for...

Thanks @Sackmycook. I will have a look for some of them. Not sure what my existing headlamps are but think they are the original halogens and they are not LED or Zenon.

Not sure what bulbs were in mine when I got it (other than being H4) but I went for the Philips GT200 and, like you, see a big improvement over stock. Road legal too and I don’t get flashed by oncoming cars so clearly not causing too much fuss for other road users. I don’t feel the need to...

Replace the whole headlights, don't faff about with just the bulbs. https://www.t6forum.com/threads/h4-to-h7-upgrade.10008/

Cool, not an issue then. I wasn't sure whether there was room to fit all the gubbins out of sight behind the covers

I was unsure because I have never changed a headlight bulb on mine, so went on the Halfords site, put in my reg and checked which bulbs I have, and mine are H7 so should be OK.

Pretty sure VW designed the van body and then put some clear plastic candle covers on the corners. Who else could design a van where the water runs off the roof and straight into the open cab windows.

The older version has removable DRL holder without wires. They have been known to fail due to heat. It is possible to replace the holder with the wired version if you can solder. It affects Originals (no letter after the part number) and revisions A to E (letter after the part number)...

https://www.t6forum.com/threads/halogen-bulb-upgrades-that-are-not-led.56445/#post-732724 I posted view of a car-magazine review on normal incandescent bulbs but the where not H4 but H7 and H1 not the same but a guide that may still be applied. On another vehicle I recently fitted Halford's...

I've had the bulb warning light go off on my 2016 T6 Caravelle. Had a look and I beleive it is the driver side daytime running light (it's the area marked in red on the attached photo). I ordered a new bulb and had ten minutes free this afternoon to try and replace it, an hour later I hadn't got...

Thanks for the advice. I’ve picked up a pair, with the plan to fit both. Where would you recommend for coding to be done? Is something a VAG indie garage could do? Thanks. .