Search results for query: lowering

And the lower centre if you have it?

Isnt the main consideration here the overall diameter of the wheel tyre combo?. If bigger than stock then will be higher geared and therefore potentially using lower revs for same speed (although not always true that lower revs = lower MPG as this depends on all that torque curve voodoo stuff)...

The arch gap after lowering looks like it hasn’t been lowered. How much lower is it by fitting the solow springs?

The front shocks top rubber mount are problematic and the rear spring lower mounting rubber also troublesome yes change them they arent expensive

Hi all I replaced my headlights yesterday and there are a couple of missing / wrong fixing screws/ in wrong location. The top 2 screws/ bolts on both are fine but the inner and lower fixings are a bit random. One headlight has a long screw/ bolt with coarse thread in the lower fixing the other...

No that's very nice actually! Decent ET and solid tire look. And really like equal arch gap around the tire, by lowering. But can't (or don't want to) lower mine

Bought a Startline with business pack but it seems to sit too high. 16 inch wheels. They look better when lowered but is it worth the cost? 18 or 20 inch wheels plus tyres and lowering over £2000??

Fortunately mine is neither lowered nor raised, so that factor can be eliminated from my MPG efforts.

Trouble is I need it out now to get the lower dash panel back in, or cut the at the rotary switch.

I had 8.5j front and 10j until recently, 265/40 tyres all round . The ET matters too of course. 60mm lowered.

Personally I'd say get it lowered as the first step if you are considering lowering it anyway. You might just find that you are happy with how it looks on those 18's then. You can't decide anything while it sits so high. I had mine lowered and kept it on the 17" Devonports for a while before I...

Hi all I’d greatly appreciate some help on this. I’m looking to add several new 12v circuits into my lower dash fuse box..My first task is add 3 x 2.5mm continuous circuits. 2x 20amp 1x 10amp I’ve take the fuse box out, removed the back cover, I’ve got the 2.5mm wire ready and the associated...

Clearcut campers - integrated lowered base with swivel - really happy with mine with minimal rocking and nice to retain the standard height

Or use lower freezing point screen wash Works for me

245/45 is fine on 9J. ET shouldn't cause rubbing even if lowered.

how much is your van lowered and is it converted in back or just kombi seats in rear ?

Nice job! Koni Active shocks and H&R springs?

That was the old set. ;) Wolfrace Munich GTR in 8.5x19 with 255/45 Michelin CC2. Lowered on Eibach Pro Street S around 55mm. New Setup is Leighton in 8.5 & 10x20 lowered around 70mm. 245/45 & 265/40 Michelin CC3 Sport. If you want more details just send me a DM.

Alright, I ended up only having to adjust the rear roller bracket and it fixed my issue. However, I only discovered this after ordering a lower roller and then ordering a pack of all 3 rollers (to get the other 2 cheap) off eBay. So I have 2 of the bloomin’ lower rollers now. Want one?

Swapped from winter to summer wheels today and noticed that both my rear lower spring mounts look rather the worse for wear. I need to replace them. Is there a better product out there than VW OEM? How high do I need to get my van to replace them? Thanks ! :)