Search results for query: Switched live

Recommendation on how best to tidy all these pig tails up ? Can I simplify it ? Do I need three pig tails looking for ignition/switch live ? Orange wire look like it goes under drivers seat, another is for a dash cam, another is for main stereo video feed.

Is it the switched AUX live for things like caravan fridge? There is usually a secondary wiring kit to install this.

Greetings all, I am about to purchase the Ovano switch system. Just torn between the Narrow or the full drawer XL system. The Narrow appears to have some more added space for storing longer items however the full drawer system appears to use all the available loading drawer space area and looks...

I think you’re very close on the logic, but there’s one important detail that might change the conclusion. You’re right that: The pressure pad is normally open and closes with weight The seatbelt switch is normally closed and opens when latched A path to ground only exists when someone is...

Pin 6 is ignition switched so I think this is what should wake the module up. Pins 1 and 25 are permanent live. Pin 32 is the break light switch, connects to many places in the loom but the source is the switch by the brake pedal pin 3 red/black. Anyway it's an input to the module so shouldn't...

Hi, new member to the forum. Recent convert to T6 ownership, have read and watch various threads and videos. So first list of jobs have included sound deadening and carpet lining. Know I have an issue/problem. Have installed 6 small led spot light in the headlining. Removed the standard rocker...

I'd temporarily wire things and check operation before you install. Several folks on this thread have recommended making sure the switched live is switched even if running from the leisure battery.

The red is permanently live, so presumably either [Brown] or [red/brown] is switched negative by the door and on the BCM timer? Do you know which?

Ok so my 5.1 velle has given up on the central locking, for the last 6 months I’ve been using a coded key having to unlock the door, turn the ignition to deactivate the alarm then lock and unlock the drivers door. Now it’s just gone dead, no central locking, no switch working from the door...

For that fuse panel yes, just connect the pos and neg. But check all those in-line fuses as you will have to change some as they will probs all be 5A. But we’ve run 16mm2 for the fuse panel so you may as well connect the fuse even if you use it as a big busbar. But keeping the fuse box gives...

I had exactly the same problem today. I also had an error, reverse parking sensors and camera unavailable. Popped into a hop came out started the van and everything disappeared ! I am waiting for it to reappear . If it does and I find a cause I will post it.

In at @HubertK consumer unit the mcbs are just that, double pole overcurrent devices so no earth leakage detection so the layout in his photo is correct. Again if the 25A RCD shown was rated at 16A and an RCBO instead then overcurrent protection would protect the cable supplying the van from the...

Thanks Howzat. No it won't switch back on using the head unit buttons. I have to pull over, then switch ignition off and then back on to resume normal play. Any ideas? Cheers

We avoid the NT like the plague, they are worse than the rich landowners who handed over their property to avoid inheritance tax. Proper little grey haired curtain twitchers :rolleyes: Unless you’re in Cornwall and then it’s failed surfers riding round in NT Landrovers saying “Oi get orrf moi...

Ok great! So to make sure I have this right….. Connect the +ve/live from the current plug to the live for the new light, connect the other two from the current plug to the outer pins of a rocker switch and a new earth to the centre pin of the rocker switch earthed to the chassis?

Does running it on a permanent live drain much on the battery? Only the Dashcam I have installed now is only on with ignition

Depends on the camera/power supply. Some are simple and will just draw power from either - some are electronic and always draw power from the permanent live but shut down when the power is removed from the switched (this is often done so that the camera can finish saving the current file, though...

I imagine OBD ports have a couple of pins that remain live - and these are used by the corresponding sockets on plugs for the dash cam parking mode etc.as well as pins that are switched with the ignition - which presumably the MS device uses in order to remain plugged in without draining the...

I know variations of this question have been asked but I can’t seem to find my variation! I have bought one of those rear view mirrors with a front facing camera and a rear camera. It all works fine but it has a cable at the camera end that you are supposed to tap into the reverse live cable...

Its fine, the wire from the light switch is the live feed