Search results for query: DRL bulb

I had a tow bar fitted a few weeks back and it’s caused my THQ T6.1 V1 headlights to come up with a random error. Convinced it’s the “piggy back” wiring to rear lights that’s caused it. They were fine before I had it fitted. It’s causing my LED bulb in only the passenger side full beam to...

Takes me about 1/2 a minute to remove, and 1/2 hour to replace!

They're the ones, I think @ginkster went the same way too, didn't fancy LED's in main and dipped due to potential MOT issues etc.

Someone else posted about DRL checks only being for vehicles 2018>. Not sure what happens if there’s a bulb warning on the dash. Possible to code out, I understand. This is from DVLA website: If it’s safer with, then I’ll keep my 2016 DRLs in good working order.

It was a blown interior light fuse that was causing all the problems. Why this was effecting the rear lights I’ve no idea. But that’s what caused it. I’ve also got my bumper and bonnet DRLs working. I kept them off the light circuit and took them to an ignition feed in the fuse box beside the...

At £20, my redundant H4 headlights took a couple of months to sell to someone using them temporarily on a T5 to T6 front end conversion. The replacement H7 headlights I bought were a direct fit for me. The only Carista coding needed was to make the dip and main bulbs stay on when on full beam...

Hi, I'm looking for the part number for a drl bulb holder on a 2014 t5.1, mine has worn and the light keeps going out, if I wiggle the bulb it come on again

I went for these ones: VW Transporter T6.1 LED DRL Upgraded Headlights - T6.1 Lights - Transporter HQ With the LED bulbs

Can someone tell me how to adjust the alignment of the original H15 halogen high beam headlights in a T6.1 van?? Having fitted LED bulbs, I want to lower the DRL and High Beam slightly because they are too high. I’ve spent hours trying to find documentation to show what screws / where the screws...

...Bulbs (Pair) H7 lights will need 2 pairs of these bulbs. 582 7440 Twenty20 Elegance Canbus LED's 12V W21W LED DRL's. The Twenty20 Led DRL bulbs will need the following Canbus kit to stop a Bulb warning on your dash. VW T6 Transporter LED Fog Light Upgrade | eBay You might be able to source a...

With my new loom extender I have tried out the old light. The fault is not seen. While you may think the fault is then with the headlight, I have replaced the entire unit. So there are no common parts. A thought I did have is the current pull difference between an LED and the bulb of the...

Yep, I enabled dipped and full beam on together. Without going LED bulb, I’m searching for a brighter drl bulb

I have installed the following bulbs in my DRL's, I tried different bulbs from Tewnty20 but due to their form factor I couldn't get them to fit in the light housing and dind't fancy taking the headlight unit off the van to install...

I like the H7 DRL's with a LED bulb......each to their own

...of a PITA to get in even with the headlamp out on the bench) Also there is a known fault with the H7 DRL holder which can be fixed with a new bulb holder which has wires attached. Also referenced earlier in the thread. If your having a lot of trouble with H7 DRL bulbs then the holder is the...

Hi guys... Quick question that someone may be able to help with hopefully... A friend has a set of DRL's in his bumper that seem to flicker/pulse when headlights are on and engine is running, they work as they should when engine is off. Connections are as follows; DRL Wiring; Black -...

In my quick test, the engine was running but with the hand brake on. Is this the DRL?

Update, just for anyone searching this in future: Just spoke to THQ, who have advised the problem will be due to me having the aftermarket DRL bumper inserts fitted. Options are to either code out the bulb warning with Vagcom, or to remove/disconnect the DRL inserts.

This is my PV with second hand H7 lights, with the drl's changed to LED bulbs, which is legal.

could I ask what led h15 lamps your using ? I have tried a couple but always come up with errors and don't work.. cheers