Search results for query: cable under passenger seat

I have brought the Renogy 1000w inverter, with built in change over switch. I’m hoping to mount the inverter under drivers seat, and use this to power up the 240v socket/s when not on EHU. Inverter power use will be 6 minutes at 400-500w ( hot choc velvetiser ) Two cups worth! Our 160ah...

Good post. How did you do step 2 without damaging the threads?

More wiring. Passenger seat, seat base and battery out today to route the wiring into the seat base, all done now. Added a 12v fuse box for the interior LED strips, rear floodlight, power feed to a Renogy One Core (future purchase) and the USB/12v in the seat back board. Oh and the PV cables...

The shunt is on the negative and the other devices could (and probably are) connected to a vehicle ground near each box. Being close to the shunt on the negative side is irrelevant. Cable sizes and length on the positive can be anything, so long as they don’t cause voltage drop or are too thin...

Hi, Sorry, this is doing my head in... I've got 2 amps to install: https://vault.alpine-usa.com/products/documents/OM_MRP-F200.PDF (T130 variant) Alpine MRP M500 - Amplifier Owner`s manual : Free Download, Borrow, and Streaming : Internet Archive (M450 variant) I want to run one power cable...

Finished fitting my 2000w inverter, Inc painting the mounting board, passenger seat out, battery out, 50mm² cables made up and 250a Megafuse added to my main fused busbar. All fits lovely, even with the factory swivelling seat Tested with a 500w heatgun I've been using for all my...

Progress on my audio upgrade… This will run from headunit quad lock to under seat to connect to Helix DSP. Also, removed front passenger seat and checked - I have the large red cable and it’s live so will be connecting that into a distribution fuse block and the powering the Audison amp...

There’s a 10mm2 cable which runs to a small fuse board under the passenger seat of my T6.1. I’m lead to believe the 10mm2 cable can also supply a DC-DC charger which I was going to do but have now changed my mind. Instead would it be possible to install a fuse and wire to a 12V accessory socket...

Moved DC-DC charger, Fogstar 105ah battery, shunt and Ablemail AMT12-2 from rear wardrobe to under the single passenger seat to free up storage room in the back. The mains charger will also be moved to under the drivers seat. I also tidied up the busbars, cabling and CBE fuse box in the wardrobe...

I am a bit confused about the swivel on the passenger seat . As you already have electrics under the seat with a VW cable harness and fuse holder fixed under the Passenger seat ? Do you have a separate plate for the seat base swivel , that sits on top of the existing seat base? If so , only the...

Have you had a conversion? Or seat swivels? The wire loom runs under the passenger seat, up the B pillar, then along the roof shoulder and down the D pillar. So trapped cables, drilled wires, loose plugs, corrosion on wet plugs are all possible issues. Post some pics so we can see what's...

Mine also came with relays however to add a degree of protection I used a perm feed from under the passenger seat and then fed this to a new relay which then provides a feed to a small fusebox and then all the relays for the seating are fed from this. It is likely I overly complicated it...

As title says, I want to run an audio cable from under the dash to under my passenger seat where I'll be putting an amp for my sub. What's the easiest way to do this? Are we talking a full seat and flooring removal or are there any short cuts? Thanks.

you can put the inverter wherever you like as long as it's cabled correctly. My LB is under the passenger seat. The inverter is over the rear offside wheel arch.

@EAN , yes mine is a T6. I’ll connect both wires into the DC-DC ad you suggest, I can’t think what else to do anyway. The additional 40 A circuit doesn’t show up anywhere in the rear wiring in the cupboard. I left the fuse in and tested everywhere for 12V and couldn’t find any. It’s a mystery...

Bear in mind if you’re fitting the alpine sub, it’s super tight under the drivers seat afterwards. I’ve a (Motexion) bulkhead in, and didn’t mind having the amp on the rear of the sub, but it would be impossible to adjust or tinker with it once the seat and bulkhead are in, plus I had to stick...

For your DC-DC consider the Victron Orion XS - it's got a higher peak charging current if you are going for such a larger battery and I think it's physically smaller and runs cooler too. Operationally if you are managing the smart shunt and solar through the Victron app you may as well manage...

This is how my voltages show across the various boxes. Engine running, Orion off and solar panels isolated. Shunt and Orion are with the LB under the passenger seat, MPPT in the rear offside wardrobe (about 3m of cable away). Chris - as you can see the voltages are exactly the same (or...

Cable Length, Sizing and Fuses: (Updated) This has been the most taxing part but I've done the maths and I think I'm pretty much there with most of it. I have made a couple of assumptions, which I'm not happy with doing, but I will document them later in this thread and hopefully get some...