Search results for query: Sliding door fuse

that issue will be related to the door lock/position sensors on the door. Fault codes: 03301 Feedback Locked-Position Drivers-Door 03302 Feedback Locked-Position Passengers-Door 03303 Feedback Locked-Position rear-left 03442 Feedback Lock-Position Trunk have a look here ...

Hi Dellmassive, Thanks for the quick response, i have tried to clear the codes with carista, but it doesn't reset them. The MFD dash shows all doors closed & disappears once the van is running & all doors lock/unlock with the key fob. I was hoping VCDS may be able to reset the 4 locked position...

I bought a 16plate Kombi at the end of last August, the first one we saw in Pearl Black. We never got to spend a night in it due to work and wanting to make it a bit comfortable untill this weekend. I spent the resulting months on this forum and learnt loads. I sound deadened and insulated it...

I was told the warranty had to expire before they can start the deal, then the system update before they could process it so you can’t actually get uninterrupted cover (weird VW approach!). I went to MK for the check but I have loads of customisations, wheels, suspension, lights front, back and...

`Thank you for your reply, i dont actually have an electric door? that i know of? could the place i bought it from easily have removed it? or what else could it be for? In regards to the thick red and thin small red wire could i just not add an inline fuse there at the end before adding it to...

I have a 2016 Multivan (TDI, 204, 4motion, DSG, Highline, Dynaudio) with a factory fitted battery under the driver seat. The car has a aux heater, electrical sliding doors (both sides), electrical driver seat. I'm trying to figure out if the 12V socket in the trunk and next to the backseat of...

Since october it was fine, in february it poped the message. I connected the dc-dc system back in april, it has been fine since now. It started to again. I have dc-dc system disconnected (no fuse in the AGU holder), also the engine live input wire. I monitored the Cteck battery sense. This...

I would never wire additional "anything" to the main BMC or the Starter Battery. Any circuits I now have and will be adding are on a separate, Board Battery, fused and with switches. This way, you are always in control of what happens and haven't got to rely on the often silly and limiting...

HI I was away in the bus at the weekend for the first time and when i had the fridge and a little 12v kettle plugged into the 12v dashboard socket i believe the fuse blew, i have the comfort dash, can anyone show me which is the fuse i need to replace, the handbook says it can't give a schematic...

It's due to the big variation of options, For example, this is the California fuses but I don't have the 2 40a fuses for the electric sliding doors.

I now have the same error light on my dash. I was removing my cab headliner today and now that I’ve refitted it (after trimming it) my courtesy/reading light doesn’t work. None of the 3 bulbs in it work and either does the sliding door courtesy light work now. Could I have blown a fuse or...

Been working on getting leisure batteries in the seat base of the passenger double and thought I’d add my setup to this thread. I’ve got 2 x 90ah xtreme batteries wired in parrelel for 180ah total. The middle seat has a battery on its side (AGM) and my Renogy 50amp B2B MPPT charger mounted on...

I'm thinking about selling my day van / removable rear kitchen camper conversion. Please note I didn't get the kitchen pod fitted in the end, and there are a few final minor works required. The intention was to get this done myself and enjoy the van for a few more years, but circumstances have...

@Pete C i totally agree - I've had up till now everything available fuse wise from either the front or the back of the seat. @Dellmassive here are a couple of shots. basically i have a victron solar mppt (not shown) and victron shunt that i'd like to house on a central board close to the battery...

long story but my side step light is not wired in and I plan it doing it this weekend. I am taking out the double swivel seat to replace it with one from Ms Craft so that means I can easily run a feed from the fuse box in the passanger footwell. Which is the correct fuse for me to take a feed...

Hi all, I’m after some help! I’ve searched and looked through lots of the downloads but can’t find the answer. There is a 12v cigarette lighter socket just behind the sliding door on the drivers side and it’s not worked since I’ve had the van. The front socket and the one by the tailgate work...

Had further issues over the last few months but not had much chance to look at it. This time, O/S sliding door is doing nothing at all!! No lights on the dash button or sound of movement from the motor. Hooked it up to VCDS today and no response from the module on this side. Checked the fuse...

very nice . . . post those pics over here too . . . https://www.t6forum.com/threads/seat-base-electric-ehu-solar-install-how-we-done-it.25368/ .

Hi, van will be for sale soon but could do with some help as I’m unsure on what to price it, would be plus vat too. Located north Shropshire. Rough Spec is, T6 2018 102 5 speed swb highline 40050 miles will go up slightly Rear sensors, AC, heated front/rear screens Caravelle set up, 4 captains...

@travelvolts I don’t think so but I’ll double check everything this evening. As far as I’m aware just the passenger side behind the sliding door and then in the drivers side boot at floor level next to the cooling vents for the heater in the wheel arch trim. @Loz I was wondering though if VW...