Wolfrace Assassin 20" - Which Offset do I need?

[Mark Howkins]

Looking at fitting a set of Wolfrace Assassins to a 180 4 motoion.

Which ET should I select 35, 40 or 45?

Intend to lower by 3omm, I would like the outside of the wheel to sit lush with the line of the van. ie not sit inside the wheel arch too much.

Any advice appreciated.

Mark

 

[Mat_Pav]

Hi. Did you find which offset do you need?

Regards
Mat

 

[.50]

It depends how wide the rims are.
40mm offst would sit about flush with the front arch on a 9" wide rim.

45mm would ait about flush with the front arch on an 8.5" wide rim.

The rears arches are 10mm wider so the wheel wont be flush as above unless you fit a 10mm spacer or go staggered.

 

[Chopman]

You can use the tool here: Will They Fit - Online Wheel and Tyre Fitment Calculator
Like .50 said, it depends a bit on rim width.
One correction to the above - a lower offset figure will stick out more - so a 20x9 et45 is similar poke to a 20x8.5 et40.

 

[.50]

You can use the tool here: Will They Fit - Online Wheel and Tyre Fitment Calculator
Like .50 said, it depends a bit on rim width.
One correction to the above - a lower offset figure will stick out more - so a 20x9 et45 is similar poke to a 20x8.5 et40.

Opps.

Indeed a mistake on my part, sorry, and thanks for correcting me.