Wheel Spacers

[BigJim]

Ordered a set of H&R 25 mm spacers and bolts for my t6.1 4 months ago and just accepted a refund.Not sure if they were hopeless or if there is a supply shortage.Any of the suppliers on here sell them please?Reluctant to go eBay as a mate just had a set supplied with incorrect 17mm wheel bolts
15 or 20mm I’m not too bothered as I’ve since fitted 236/65s on my Devonports
Hope someone can help as H&R website says t6.1 and t6 are different fittings despite same stud pattern?

 

[Lubrown]

Ordered a set of H&R 25 mm spacers and bolts for my t6.1 4 months ago and just accepted a refund.Not sure if they were hopeless or if there is a supply shortage.Any of the suppliers on here sell them please?Reluctant to go eBay as a mate just had a set supplied with incorrect 17mm wheel bolts
15 or 20mm I’m not too bothered as I’ve since fitted 236/65s on my Devonports
Hope someone can help as H&R website says t6.1 and t6 are different fittings despite same stud pattern?

Have you tried CRS performance?

 

[BigJim]

Just messaged them thanks

 

[R8N XX]

Just messaged them thanks

I bought mine from wheel parts direct. Much cheaper than h&r. Got 25mm on the front and 35 rear. Great service and price.

 

[Lubrown]

This is the post (you should be able to click on it for the full thread) that was sticking in my mind…
Not sure if it’s the same as you had in mind but if there is a safe way and a less safe way to space wheels I guess you want the safest one.

The H&R adaptor spacers are the strongest safest way to do this and TUV approved of course , we carry them in stock they come with all the hardware to mount ( 20 bolts per axle ) they have the bolts that are the same as the VW genuine ones domed . Look great with 17 inch Devonports £140.00 per axle kit ( 2 adaptors 20 bolts per kit )

21 mm front 25 mm rear is the best way to do it .

Adaptors are so much safer than spacers and long bolts ( we have seen nightmares with normal spacers )

 

[BigJim]

I bought mine from wheel parts direct. Much cheaper than h&r. Got 25mm on the front and 35 rear. Great service and price.

View attachment 295916

View attachment 295917

Looks good.You got a t6 or t6.1?

 

[R8N XX]

Looks good.You got a t6 or t6.1?

T6. They are adaptors. They bolt to the hub.. And the wheels bolt to them.

 

[Curlynot]

I have four H&R adaptors/spacers that I took off my 6.1 that I might be interested in selling. I cant remember the thickness and I know a couple of the bolts that bolt the adaptor to the hub need replacing as they are an extremely shallow head and got damaged removing them. They were only on the van for six months and then I changed wheels.
I'm away from home at the moment tho so if you are interested and not in a hurry then message me.

Regards Rob

 

[Shaun Witts]

I have a set of four 25mm H&R adaptors with all bolts that I would be willing to sell if @Curlynot (who was 1st to offer) decides not to sell his.
They were on for about 6 months with my Devonports until they were relegated to winter tyre duty. I had intended to keep them and refit with the Devonports each winter, but unbolting/refitting them each time was too much hassle over and above doing the actual wheels themselves.

 

[HighTop]

I have a set of four 25mm H&R adaptors with all bolts that I would be willing to sell if @Curlynot (who was 1st to offer) decides not to sell his.
They were on for about 6 months with my Devonports until they were relegated to winter tyre duty. I had intended to keep them and refit with the Devonports each winter, but unbolting/refitting them each time was too much hassle over and above doing the actual wheels themselves.

Hi. I'm prob too late here, but are these spacers still available? Cheers

 

[Shaun Witts]

Hi. I'm prob too late here, but are these spacers still available? Cheers

I’ve still got them yes.

 

[HighTop]

@Shaun Witts Would you be interested in posting them as I see you are quite a way from me in Lincoln? If so, please DM me a price for all 4 + postage. Ta

 

[DXX]

@HighTop the M14 bolts that hold the spacer to the hub have a very shallow head, you’ll want a six sided 17mm socket which has had the face ground off to remove any radius to maximise the drive surface.
Spare bolts are available from Autodoc. H&R 1453011.

 

[HighTop]

@HighTop the M14 bolts that hold the spacer to the hub have a very shallow head, you’ll want a six sided 17mm socket which has had the face ground off to remove any radius to maximise the drive surface.
Spare bolts are available from Autodoc. H&R 1453011.

Thanks for the tip with the socket, I've got some spare 17mm ones, so will fettle one before using.

 

[Skyliner33]

I’ve still got them yes.

Hi Sean, if @HighTop doesnt have them 9or only wants one set I would be interested in a set. Cheers