Finally got around to fitting the gloss black grille that I purchased on black Friday. Never attempted bumper removal before, so I found the videos and info on here extremely useful.
What Have You Done To Your Van Today?
- Thread starter Daneeyre
- Start date
-
- Tags
- mod modification mods retrofit
not Vanstyle not Chinese fog lights which I am hoping won’t fill up with water.
Where did you get your service position pins? They appear to both be fitting!!Started on replacing the intake manifold today... (CXHA with parking/aux heater).
View attachment 316644
View attachment 316645
...sadly destroyed the coolant temp sensor in the process...:
View attachment 316648
I haven't driven it since doing scuttle - will let ya know. Front doors made a massive difference,
I changed the side repeater bulbs from halogen to led. As expected, got the fast flash and bulb out error.
I went through all the LED settings on the 'lamp load' settings until I got one activated that seemed to keep the bcm happy.
So far so good, no fast flash, no errors bulb warnings and scanned the module several times after each action to see if a fault code did not return.
The setting translates to daytime running module. Now although this does not tie in with its correct operation, the only thing I can think of it working, is some drl leds controlled by a separate module also control indicator leds. Drl/indicator light bar. Maybe the PWM is the correct settings for this value.
If it causes any issues I'll report back.
No resistor module was needed.
T6.1 2022 van.
I went through all the LED settings on the 'lamp load' settings until I got one activated that seemed to keep the bcm happy.
So far so good, no fast flash, no errors bulb warnings and scanned the module several times after each action to see if a fault code did not return.
The setting translates to daytime running module. Now although this does not tie in with its correct operation, the only thing I can think of it working, is some drl leds controlled by a separate module also control indicator leds. Drl/indicator light bar. Maybe the PWM is the correct settings for this value.
If it causes any issues I'll report back.
No resistor module was needed.
T6.1 2022 van.
With what? Can't tell from the pics.
With vctool. Should of said. Apologies
Hi, for some reason the pics have come out blurry. Not sure why.
Ok 09
Leuchte 16 17
Lamp load settings value new
Led tagfahrlichtmodul versorgung.
Was the only value that kept everything happy. Tried all the 'LED' title ones to no avail.
I kept the dimming for AB at 100.
Seems very bright already. Maximum brightness for led bulbs is 127.
Now this is what I changed it to.
You do this at your own risk
Ok 09
Leuchte 16 17
Lamp load settings value new
Led tagfahrlichtmodul versorgung.
Was the only value that kept everything happy. Tried all the 'LED' title ones to no avail.
I kept the dimming for AB at 100.
Seems very bright already. Maximum brightness for led bulbs is 127.
Now this is what I changed it to.
You do this at your own risk
Thank you very much!
Cheers. Totally agree on the doors. Did mine when fitting the Gladen’s and it was well worth the effort.
Taken it for its MOT and a service.
Got an electric Transitporter for a loan vehicle.
Got an electric Transitporter for a loan vehicle.
You'll have to let us know what it's like!
Commiserations.
I'm sure everyone is mis-spelling this new model...
I thought the general overarching designation was a Transhitporter ??
