Warning display

[Bobbo]

When tuning on ignition the following warning lights appear
CHANGE AIR FILTER
CHANGE OIL FILTER
STABILITY CONTROL DISABLED
STOP START DISABLED
FRONT BREAK ASSIST DISABLED
the car drives fine but can I reset these indicators or is it something more serious?

 

[Pauly]

I would hazard a guess they are separate messages
I think the two filter messages will just be simple service warnings/reminders and the others are indicating a fault/problem somewhere

What can model/year is it ?
Sometimes it can be something simple like the tracking out or a failing wheel speed sensor that causes systems to freak out and shutdown

The only way to be sure is to fault scan the system and see what error codes it returns, you can pay a garage to do it on r buy yourself a cheap scanner online that should give you enough info to get a grasp of what’s going on

 

[Bobbo]

It is 2018 t6 transporter. Air filter and oil filter changed at last service 3000 miles ago. Can only think the central censor checker is faulty but not a clue as to what to do about it.

 

[Pauly]

Or whoever serviced it didn’t reset it, you can reset tue service interval yourself if you want to that should clear the top two messages

 

[mmi]

Air filter and oil filter changed at last service 3000 miles ago

For the air filter - possibly service interval counter needs a reset - or possibly (not likely) too restrictive filter was installed as the ECU monitors intake air flow.

Change Air filter on cluster

My van can’t go more than a day wothout beeping something at me at the moment! Inspection - done Oil change / service - done Adblu fill up - done Today it randomly bitched about ‘change air filter’ and a spanner come up on the cluster on ignition on. I can’t see anything in the cluster that...

www.t6forum.com

For the oil filter - possibly the service interval needs a reset. What do service counters on dash report?

Can I reset service interval without steering wheel controls ?

Title pretty much has it. Just had a full service done on my 69 plate Trendline by my mate, an ex main dealer commercial mechanic. He can’t reset the service interval because he doesn’t have the new VAG disc for his laptop. Can I do it manually without have steering controls or do I now need to...

www.t6forum.com