USB Splitter Box for Comfort Console

Keefff

150 DSG
VIP Member
T6 Pro
Just completed a Comfort Centre Console fit and ended up zip tie-ing the dash USB inside the dash and feeding a usb and aux cable through to the cubby hole on centre console. Does anyone know if there’s a kit or part no’s for parts to split the usb feed to a secondary socket see pic of what I think I need!

67AE877C-E156-4775-8687-06B507B9D8F8.jpeg

BB4CAE20-3778-480F-9E35-D3119D4A5A0B.jpeg

49075882-44D0-41CC-9039-CCC45A73E6C2.jpeg
 

AlexJoe

Member
VIP Member
1609147434255.png
Hello,
you have to change your green cable to yellow-green (like in this picture).
HSD cable 500mm part no: 000098600R
or

HSD cable 1000mm part no: 000098600S

and plugs separately (you can read the numbers from those you already have - green for splitter, yellow for MID).

1609147786794.png
 

Keefff

150 DSG
VIP Member
T6 Pro
Thanks @AlexJoe - I’ll study your photo. It doesn’t look as simple as I thought! Do you know the part no of the splitter box itself? What is the MID? If that’s the 3.5 aux connection, I’ll leave that as a single socket in its original position.
 

AlexJoe

Member
VIP Member
MID - your radio-navigation unit
I installed this parts:
7H1971301B - bracket
5G0035953D - USB splitter
1609153620849.png
And here is electrical diagram, I used:
1609153839079.png

1609153481666.png
 

david173

Senior Member
VIP Member
T6 Guru
Nice job on the dash fit, mind me asking where you got the parts please for the comfort dash?
 

Keefff

150 DSG
VIP Member
T6 Pro
@david173 It took me a while to understand the the part no’s for upper dash Gloss Black (GVK) or Titan black lower dash (82V). Once I understood it I was able to wait and buy off eBay or Third Party Suppliers. My local dealer and vwsupply.co.uk twice mugged me off & wouldn’t order as my VIN number didn’t match. OEMVWshop.com provided my centre console and cup holder and www.partshaus.co.uk provided the top gloss black cubby hole. The upper glove box and wood effect trim is from Van-x. The whole project was not cheap, I must have spent about £1k on it!! On top the door cards are Caravelle Executive from Ebay (Poland) at £400 for a pair.
 

AlexJoe

Member
VIP Member
External ports:
1609173844319.png
PR-CODES:
1609173892906.png
9ZXVTVMobile phone interface
9W0VTVWithout car phone preparation/ installation
9ZEVTVComfort telephone system
9IEVTVMobile phone interface with WLAN (BT interface)
9IFVTVComfort telephony with WLAN
 

JOG

Senior Member
VIP Member
T6 Legend
@david173 It took me a while to understand the the part no’s for upper dash Gloss Black (GVK) or Titan black lower dash (82V). Once I understood it I was able to wait and buy off eBay or Third Party Suppliers. My local dealer and vwsupply.co.uk twice mugged me off & wouldn’t order as my VIN number didn’t match. OEMVWshop.com provided my centre console and cup holder and www.partshaus.co.uk provided the top gloss black cubby hole. The upper glove box and wood effect trim is from Van-x. The whole project was not cheap, I must have spent about £1k on it!! On top the door cards are Caravelle Executive from Ebay (Poland) at £400 for a pair.
Lovely work! The cost is scary though!
 

BoroBoy

Senior Member
VIP Member
T6 Guru
Nice job on the dash fit, mind me asking where you got the parts please for the comfort dash?
N
@david173 It took me a while to understand the the part no’s for upper dash Gloss Black (GVK) or Titan black lower dash (82V). Once I understood it I was able to wait and buy off eBay or Third Party Suppliers. My local dealer and vwsupply.co.uk twice mugged me off & wouldn’t order as my VIN number didn’t match. OEMVWshop.com provided my centre console and cup holder and www.partshaus.co.uk provided the top gloss black cubby hole. The upper glove box and wood effect trim is from Van-x. The whole project was not cheap, I must have spent about £1k on it!! On top the door cards are Caravelle Executive from Ebay (Poland) at £400 for a pair.
Do you have a part number for the Gloss Black top cubby hole?
 

Keefff

150 DSG
VIP Member
T6 Pro
I swapped my lower dash moonrock grey (92W) for Titan black (82V), but a few points. The colour match on the centre comfort console is rubbish! However Autotrader reveals that out of 150 Caravelles for sale, none have a matching Titan black centre console! The cigar socket is a pig to swap over, mine was glued in. Cutting the cab floor around the gear lever requires a decent set of side cutters (I hacked mine a bit). And the USB move is proving troublesome - hence this thread
 
Top