Towbar Wiring To 12 Way Fusebox

[BigDigger84]

Seen a few posts regarding the 12 way fusebox but not my particular issue...

So i have the fusebox already installed and the instructions (both westfalia which I have and genuine which I found on here) say to insert cables into 4, 5 & 6. the problem is the live feed into the fuse box stops at 5. Now I could just shift them all up 1 space but I don't understand what has gone wrong.

Any ideas!?

Thanks,
Wayne

 

[Pauly]

There different fusebox sand I think the others go up to 8
Check what you have has got a common bar on the feed side supplying all the fuse ways and if it has it doesn’t matter what order/slots they go in

 

[BigDigger84]

There different fusebox sand I think the others go up to 8
Check what you have has got a common bar on the feed side supplying all the fuse ways and if it has it doesn’t matter what order/slots they go in

Thanks Pauly, Mine looks to feed from 12 down to 5 then the last 4 are unpopulated.
I'll use 5, 6 & 7. It just seemed strange that the instructions seemed to suggest if the 12 way was there then it would definitely have power to slot 4.

As long as the BCM connections are correct then I'm happy!