PMS on a T6

[drew_greenday]

What is everyone using to distribute their power around their van? In my T5.1 i had an independent fuse box and a switch panel from Campervan Motorhome Caravan Boat Horse Box Switch Panels. 12V and 240V - Home but i'm thinking of going all in one on this build. The PMS and Sargent look old to me and was wondering if their is an updated version. I don't like the CBE look either......

Any pick of peoples builds will be appreciative.

Thanks

Andy

 

[travelvolts]

Why would you need anything more than a fuse box to handle distribution? All you need on show is one or two switches and perhaps a battery monitor. These can be of your choice to suit your taste.

 

[drew_greenday]

Yeah that was my thoughts, I'll source them all independently thanks.

Andy

 

[xpfloyd]

@drew_greenday I just had this chat myself on another thread this morning. I'm going to be using a 10 fuse box purchased from @travelvolts and was planning on using a simple switch panel from the same site as you posted above. I also don't like the look of CBE kit either. I just want a simple 6 switch panel with battery monitor. One of the switches will be used for the monitor so that it's not displaying all the time.

 

[travelvolts]

Don't know if this would be of interest. They are flat push buttons on self adhesive backing. Connect to a control unit via a flat cable which can be hidden behind the panel. logos are available for the buttons. 1 amp max per circuit or add extra relays to up the capacity. Can also be programmed for different operations such as latching, PTO, on/off etc.

 

[T6 Dave]

Don't know if this would be of interest. They are flat push buttons on self adhesive backing. Connect to a control unit via a flat cable which can be hidden behind the panel. logos are available for the buttons. 1 amp max per circuit or add extra relays to up the capacity. Can also be programmed for different operations such as latching, PTO, on/off etc.View attachment 8934 View attachment 8934 View attachment 8935 View attachment 8935

Hmmm nice units, one my printers can make these units complete, including the ribbon cables, so could potentially do a custom face to be applied that would say what does what, also Change colour of lighting on it.. Or make it back lit, even make a custom size and shape with custom colours... Have to do some more research me thinks