New T6.1 Tail lamps

[Loz]

Neat resistor solution Loz, looks better than the standard wirewound. Where did you source those from ?

Rs components, you should be able to see the stock number.

 

[Robert]

https://uk.rs-online.com/mobile/p/panel-mount-fixed-resistors/1852396/

My second most favourite online shop, right after eBay

 

[Yorkyrmcdo]

Fitted mine last week, fitted resistors in the end to correct the hyper flash on the instruments.
View attachment 58186 View attachment 58187

Which wires did you attach your resistors to please,

also did you sort your hyper flash

 

[Loz]

Which wires did you attach your resistors to please,

also did you sort your hyper flash

Yes, the resistor cured the hyper flash, It goes across the green & orange (the center pair)

 

[LT2019]

I need these in my life, anyone fancy doing a step-by-step guide how to fit? I have 2018 t6 tailgate. Can you buy the lights from a dealer or is it a eBay job?

 

[Yorkyrmcdo]

I need these in my life, anyone fancy doing a step-by-step guide how to fit? I have 2018 t6 tailgate. Can you buy the lights from a dealer or is it a eBay job?

The job is relatively easy, just a case of unpinning and re pinning your wires if your on standard lights

 

[LT2019]

got it booked in next week supply & fit for a good price

 

[Yorkyrmcdo]

Yes, the resistor cured the hyper flash, It goes across the green & orange (the center pair)

Do you get a bulb out warning or did you switch from led anyway

 

[Loz]

Do you get a bulb out warning or did you switch from led anyway

LED already

 

[Yorkyrmcdo]

LED already

Ah that’s why then

 

[Loz]

Ah that’s why then

Easy tweak with VCDS though.

 

[catfood12]

https://uk.rs-online.com/mobile/p/panel-mount-fixed-resistors/1852396/

My second most favourite online shop, right after eBay

I used to love reading through their catalogues.............. Looking at the pictures, dreaming of a proper Weller soldering iron and some PBC etchant........

 

[nazdaq100]

Easy tweak with VCDS though.

Hi Loz,

Love your work equally good as Adams

Would you have the part no for your REAR LED Lights driver / passenger side? Also is your Pin assignment same as Adams below

Pin assignment is
1 - brake
2 - Ground
3 - Side light
4 - Fog
5 - Indicator
6 - Reverse

and lastly could you please tell us VCDS coding Module> coding> Byte> Bit?

Thanks

 

[rayhicks]

Very neat install Loz any issues with heat from the resistors

 

[D4XEG]

Pin assignment is
1 - brake
2 - Ground
3 - Side light
4 - Fog
5 - Indicator
6 - Reverse

pin assignment is the same on both sides

part no
7LA 945 095 D Left
7LA 945 096 D Right

but I’ve ordered the LHD version for the left to have a double fog light 7LA 945 095 A

fog light is LED in these

@Adams - Did you reuse your original/previous blub holder or was it a full assembly swap with the below part numbers?

7LA 945 095 D Left
7LA 945 096 D Right

 

[Aron]

@Adams - Did you reuse your original/previous blub holder or was it a full assembly swap with the below part numbers?

7LA 945 095 D Left
7LA 945 096 D Right

The light is complete assembly.

 

[Aron]

Anyone able to help identify which colours are the wires?

 

[Pauly]

What lights are you changing from/too as there are variations ?

 

[Aron]

T6 barn door to T6.1 barn door.

 

[Deaky]

Anyone able to help identify which colours are the wires?

LH Light
Brake light - black/red
LH indicator - black/white
Ground - brown
Side lights - grey/black
Reverse - green/black

RH Light
Brake light - black/red
RH indicator - black/green
Ground - brown
Side lights - grey/black
Reverse - green/black
Fog light - grey/white