Yup! Still got these. Msg me with you address, etc, and I’ll track them down in the garage.
FREE Lots of pre-conversion bits —> panels, steps, fixings, windows, etc - remaining parts are free
- Thread starter RunDSG
- Start date
-
- Tags
- carpet slider wheel arches windows
They’re from a panel van. Just outside the city on the A14.
Hi all,
I’ve still got a bunch of this stuff. Happy to pass it on to someone who might find it useful. I’ve received a lot of generosity from this forum, so if you can collect, it’s yours for free.
Drop me a message.
1) Camper Glass - Fixed, tinted, sliding door windows x 2
2) OEM full ceiling panels with poppers. Some marks where aftermarket led lights were fitted. Including plastic seam trim piece.
3) OEM rear lower quarter panels + b-pillar seat belt panels w/ poppers.
4) Carpeted panels for the tailgate (top and bottom) + sliding doors w/ poppers. 5mm ply.
5) Plastic wiring loom bracket and covers from under the double passenger seat.
6) OEM Fixed seat bracket from double passenger seat.
7) Carpeted rear panels over wheel arches. 5mm ply.
8) Full ply floor with previous carpet removed. 9mm ply.
9) Carpeted boxed wheel arch covers. 9mm ply. (first buyer didn’t collect)
10) Twin slider side steps.
I’ve still got a bunch of this stuff. Happy to pass it on to someone who might find it useful. I’ve received a lot of generosity from this forum, so if you can collect, it’s yours for free.
Drop me a message.
1) Camper Glass - Fixed, tinted, sliding door windows x 2
2) OEM full ceiling panels with poppers. Some marks where aftermarket led lights were fitted. Including plastic seam trim piece.
3) OEM rear lower quarter panels + b-pillar seat belt panels w/ poppers.
4) Carpeted panels for the tailgate (top and bottom) + sliding doors w/ poppers. 5mm ply.
5) Plastic wiring loom bracket and covers from under the double passenger seat.
6) OEM Fixed seat bracket from double passenger seat.
7) Carpeted rear panels over wheel arches. 5mm ply.
8) Full ply floor with previous carpet removed. 9mm ply.
9) Carpeted boxed wheel arch covers. 9mm ply. (first buyer didn’t collect)
10) Twin slider side steps.
Where exactly you based, looking for rear kombi grey fibres as tenp fix.
Cambridge. Grey fibres?
Kombi grey fibre panels
Oh right. Gotcha.
Tailgate went today. Sorry.
I have the passenger slider.
Very sure the glass is same for LWB/SWB.
Thanks for the quick reply. Shame about the tailgate to trim. I think the glass is the same too. I will double check. The sliding door trim would be good too as it looks a pain to make.
Here’s what’s left:
1) b-pillar seat belt panels w/ poppers.
2) Plastic wiring loom bracket and covers from under the double passenger seat.
3) OEM Fixed seat bracket from double passenger seat.
4) Carpeted boxed wheel arch covers. 9mm ply. (first buyer didn’t collect)
5) Twin slider side steps.
1) b-pillar seat belt panels w/ poppers.
2) Plastic wiring loom bracket and covers from under the double passenger seat.
3) OEM Fixed seat bracket from double passenger seat.
4) Carpeted boxed wheel arch covers. 9mm ply. (first buyer didn’t collect)
5) Twin slider side steps.
The top b pillar panel? You have drivers side?
Sorry. I don’t have the upper panel. That stayed in the conversion.
No, sorry.
Similar threads
