Loom connectors needed.

Skyliner33

Senior Member
VCDS User
VIP Member
T6 Legend
I'm in the process of fitting an amp to my headunit.
I have done all the connections and run the wired to my amp which is under the passenger seat.
I've run wires from the amp to the speakers then realised I'd bought the male plug part of the connector rather than the female parts I need.

I think I've managed to find the part number for the a pillar speaker I need: 3B0 972 712. Looking for confirmation and a source of these parts.

However I need to find the part number that the door speaker plugs into. Basically the part this will plug into:
Screenshot 2020-05-28 at 10.50.03.png
 
if the part number is correct you'll be able to get them on ebay or Aliexpress if you're prepared to wait a little longer.

 
if the part number is correct you'll be able to get them on ebay or Aliexpress if you're prepared to wait a little longer.

Thanks, I was hoping to find something a but faster. No tunes in the van :( I could cut the connectors off my Etons and use some generic ones but Im not keen on butchering a set of expensive speakers.

Plus I need to find the other part number also.
 
I've since discovered I only need the part number 3B0 972 712 with pins (x2).
 
Back
Top