Locking sync

[Heskey18]

All of a sudden my lock sync seems to have changed . Now when i start the engine & pull away i hear a locking sound . & when I’ve turned the ignition off i now need to unlock the barn doors with the fob . Whereas before i never . Anyone shine a light on this?

 

[Dellmassive]

that can be changed with Carists /vcds etc etc T6.

lock / unlock when driving above 10mph and unlock when key off.


and i think you can change it via dash on a T6.1

 

[Alster]

Yes you can change it via the dash on a 6.1

 

[Heskey18]

Sorry it’s a t6 sportline . Suddenly changed & i can’t workout how

 

[Dellmassive]

he said it was a 2018 T6.

if you havent been playing with a scanner . . . .

then.

maybe try a reset:

[Guide] Full Van ECU Reset (Capacitive Discharge) -- How I Done It --

Full Van ECU Reset (Capacitive Discharge) -- How I Done It -- The T6 is full of ECU`s, Modules, CAN Buses and Data packets . . . . . Just like your Phone or PC right. The motor vehicle industry has spent years with research and development making the modern car/van Data and electrical system...

www.t6forum.com

.

 

[Heskey18]

My inner door handle now requires 2 pulls to unlock

 

[Dellmassive]

My inner door handle now requires 2 pulls to unlock

that means its deadlocked

 

[Heskey18]

Pressed the button on the RH b post & it seems to have gone back to normal

 

[Dellmassive]

RHS b piller buttons are normally.

Disable interior alarm sensor.

And disable tow away alarm.