Leisure Battery Install - Trim Removal

[WheelieBealie]

I'm trying to run the cabling for my BCBC charger I've just bought from @travelvolts but I've run into an issue straight away, how do I remove this plastic trim panel am I missing something as there's no hope of pulling the carpet back while this is in place! Glovebox is out and the end panel is also off.



I'll add all my comments and pictures to this thread as I do it and then tidy all the comments etc. up afterwards, there are plenty of how to"s on here in terms of wiring and all that but I couldn't find too many pointers on how to remove trim, the seats and that side of things.

If not appropriate then admin can freely delete this thread.

 

[Deaky]

2 or 3 clips across the front, pull it down towards the floor and the clips will release, then pull it towards you, there's a hook holding it up at the back.

 

[WheelieBealie]

2 or 3 clips across the front, pull it down towards the floor and the clips will release, then pull it towards you, there's a hook holding it up at the back.

Cheers, so it is give it quite a bit of a tug then, didn't want to pull too hard in case I broke it!