Sold Koni Shocks with H&R Lowering Springs

[TW2904]

T32 Koni Active Shocks with H&R 40mm lowering springs.

Steve mentioned that the T32 bracket could be removed and they could be used on a T28 or T30.

Supplied and subsequently removed by Steve at CRS Performance. Covered less than 8k miles. These are a great upgrade and in full working order.

They were reluctantly removed after 12 months as I wanted to go lower.

Looking for £550. Collection from Huntingdon or Windsor.

 

[T6 LeeHam]

Hi mate any pics of these fitted?

 

[TW2904]

Hi mate any pics of these fitted?

These are with 20” Range Rover HST wheels.

Thanks,

Tom

 

[PIPPS30]

How much firmer were they over the standard T32 set up I'm on 19"
Cheers

 

[Wills]

There are 4 spring kit offerings from H&R. The spring codes reveal they’re firm front (2) and softer rears (1).
See link….. kit B H R Lowering Sports Springs 40mm VW T5 T6 - Vanstyle

 

[evans1089]

@CRS Performance With the soft rear springs, would you recommend against this spring when towing?

 

[Gavinda]

Im pretty sure that with the black adaptors remove these would also suit T28 and 30.

 

[TW2904]

How much firmer were they over the standard T32 set up I'm on 19"
Cheers

They’re a significant upgrade on the standard set-up and can’t fault the ride quality. Far less roll and road noise.

Im pretty sure that with the black adaptors remove these would also suit T28 and 30.

Steve mentioned that the T32 bracket could be removed and they could be used on a T28 or T30.

 

[TW2904]

Sold