‘Inspection due’ help

[lukethompson86]

Can anyone advise how to reset the ‘ inspection due’ on the dash

I’ve tried the whole ;

Hazards on
Hold set / odometer
Turn ignition on and then release odometer but I’m getting nothing

Can’t see what I’m missing

2021 T6.1 T30 start line business model

Thanks all

 

[mmi]

Post in thread 'T6.1 oil reset process'

9 Jul 2022

Just hold the 0.0 button in front of the steering wheel then turn the ignition on (dont start the engine)
Hold it for a couple seconds then let go of the button when it displays reset oil, then press the button again to actually reset it

If you want to reset the inspection interval do the same process again but hold the button for a few seconds longer it will go to oil reset then to inspection reset then let go off the button while inspection is displayed, then press the button again to perform the reset

If you hold it a few seconds longer again it will go to oil then inspection then...

• Pauly

• 

 

[lukethompson86]

So just to be clear I press the button by the speedometer yes ?
The odometer reset ?

Some conflicting info on some other threads saying to press the ok on the steering wheel when I want to reset.
That definitely didn’t work for me.

 

[mmi]

Perhaps Owner's manual shows the details?

 

[Bigsidavies]

Does yours not have a button with “0.0” in front of the steering wheel? Mine definitely does.
Unless a T6.1 is different.

 

[lukethompson86]

Perhaps Owner's manual shows the details?

cant bloody find it anywhere

 

[lukethompson86]

All sorted now ! Thank you

 

[Dundee_Kev]

All sorted now ! Thank you

And your solution was??

 

[lukethompson86]

And your solution was??

Had a new battery fitted and got the guy to use his reader to reset the code
Tried the hazard button reset combination loads of times to no avail