Leon48
Member
It’s all flat buddy,the platform is the same height as the train,there bumps in the train to drive over but I’m pretty low with a front spoiler and lower lip,no problem,get over there,far better than this country.
Hi I'm Solow Suspension, here to help.
- Thread starter Solow Suspension
- Start date
Leon48
Member
class!Hi Andy, Just looked on your website and your So-low+ air suspension is out nof stock, any idea when it'll be back?
Hello, I'm told around 4 weeks. Sorry for the delay. This kit has become more popular than we imagined and we're struggling to keep on top of stock.
Very similar spec to mine, tyres, lows, camper etc ... how much adjustment have you left on the Solows ?
rears im at full height so plenty of adjustment there. fronts im about 3/4 down.
Have just had @Solow Suspension NSL fitted at Sanspeed in Kent. Running almost all the way down on a T32 T6. Sanspeed have done a brilliant job. Really happy with the service and professionalism. However, two days in and the back right corner is squeaking. Rubbers have also been changed. Before I get in touch with them on Monday - has anybody had any experience of this and what needs to be done? They are 1hr away so difficult to get up to them and I dont want to use anyone else to keep the warranty. Thank you! BTW... despite the sound... it has transformed the ride of the van. Love it!
Many years ago, getting a Volvo estate off the ferry at Dover, the car was so full of beer etc. everyone had to get out and lift the back so the towbar cleared the ramp - Happy days...
Hi all, bit of advice needed if poss!
Just had a failed MoT with a nearside drop link excessively worn. Sounds ok normally but only fitted them back in Dec 24, and the links were new at same time as i dropped the van on Solow Lows. (Links were Starlink ones from Euros).
Wondering if I just lucked out and got a dud part (the link) or whether I should have gone to longer links and thats why its worn fast (considering its had relatively low mileage since then - 1326 miles)
Attached is pic of the vans running height currently, and also what I could see sticking phone in the wheel arch - link looks quick vertical and I've read on here that they wear faster with link more vertical?
I've got H&R ARBs to fit shortly but need to sort the MoT first!
Just had a failed MoT with a nearside drop link excessively worn. Sounds ok normally but only fitted them back in Dec 24, and the links were new at same time as i dropped the van on Solow Lows. (Links were Starlink ones from Euros).
Wondering if I just lucked out and got a dud part (the link) or whether I should have gone to longer links and thats why its worn fast (considering its had relatively low mileage since then - 1326 miles)
Attached is pic of the vans running height currently, and also what I could see sticking phone in the wheel arch - link looks quick vertical and I've read on here that they wear faster with link more vertical?
I've got H&R ARBs to fit shortly but need to sort the MoT first!
Surely to have a warranty on The links?
Hi, do you get any rubbing? TIA
Nope, although I think at full lock they touch the liners as I spotted some lines in the dust on them once by never noticed it
Thanks. I tried some 255/45R19s and they rubbed quite a bit on full lock. Strange that some do and some vans don't.
That is weird but how low are you? That could have an impact. I have had 3 different brands and not had a problem with any of them
I’m on STX all the way down. Wheel centre to arch is 385mm. Could depend on wheel offset? What are yours? Mine at Cantera 19s.
I think the offset was the standard offset whatever that is but I considered adding spacers to push them out a bit, I think mine is down to around 41-42cm
Hi I'm having trouble with my front wheels rubbing in corners. I'm on Solow lows and 17" banded steels with 235-55-17s. I've put a pic of the front shock below this is how it was set by the garage. Is there just 30mm of adjustment? As in 30mm of thread showing from the bottom to the collar?
Sits nice, but unfortunately I can’t comment on your rubbing troubles…. maybe an authorised fitter of SoLow stuff like @Dav-Tec can offer some insight/advice??
