Fiamma & Pop Top

[Dan M]

Hi All,

Looking for some advice, tried googling it to death and reading some posts on similar topics but still haven't found the complete answer I'm looking for. My van is currently partially converted and I want to end up with a Fiamma F45 and a Pop Top, however due to the cost and lead time of a pop top I'm not going to be able to get that sorted until the winter but I want go get the Fiamma installed for this summer. I'm confused around what brackets are required to install it in combination with multi rails without causing problems to then have to re-install it once the pop top is installed.

Current Setup
Multivan rails
Kador strip from inflatable awning to multivan rails

Intermediate Setup
Addition of F45 Fiamma
Inflatable awning

Final Setup
Pop top installation
Fiamma F45
Inflatable awning

Hopefully someone can help,

Cheers,
Dan

 

[Davenjo]

I think connection of a Fiamma to your multivan rails is easy via standard Fiamma brackets:- Fiamma Kit F45 VW T5 Transporter Multivan

Depending which poptop you will have to redo once you get a poptop but only the cost of new brackets to consider.

 

[Fish]

Only issue would be drilling then removing..

 

[Davenjo]

Only issue would be drilling then removing..

No drilling with multivan rails??

 

[Fish]

Fiamma Kit Multirail Reimo VW T5
@Davenjo are the multivan rails different to reimo?.

 

[Dan M]

No drilling should be required with the multivan rail but I believe it needs Sikaflex which could be just as bad..

Think this is the Multivan rail bracket: 06290_e.jpg

And here: Fiamma F45S Awning for VW T5/T6 Special Versions

 

[Davenjo]

Fiamma Kit Multirail Reimo VW T5
@Davenjo are the multivan rails different to reimo?.

Yes

 

[Slw66]

Hi all, I’m looking for the actual Multivan rail that sits in the gully in top of my T6, can’t find where to buy one, grateful for pointers in where to get

 

[Wills]

Depending which poptop you will have to redo once you get a poptop but only the cost of new brackets to consider.

The SCA pop top covers the multi rail so I ended up fitting a Fiamma bracket and Reimo rail Omnistor awning fitting