REIMO 3000 bonded track seating

Here is a Sportline with REIMO roof, Eclipse bed and REIMO 3000 track seating system with matching sportline leather upholstery. The floor I also raised and insulated up t track level. Full lining, sound deadening and insulation package as well as 12v LED lighting system.

We are trained REIMO 3000 bonded seat system installers so get in touch if we can help.

DSC02834.jpg

DSC02814.jpg


DSC02825.jpg

DSC02806.jpg

DSC02812.jpg

DSC02827.jpg

DSC02815.jpg

DSC02817.jpg

20211104_124728.jpg

20211104_124839.jpg
 
Been busy with conversions and pods lately, here is a standard pod for T5/T6 which sits behind the driver’s seat. Housing single burner hob/sink combo and a CRX 50 fridge this sits nicely with a full width bed in the rear.
Many colours available and edge finishes, we particularly like the bare oiled birch edges.

20180731_163435~2 (2).jpg

20180731_163604.jpg
 
20211123_131211.jpg

Here we have a 0.3mm deep CNC engraving into the HPL finish to produce our logo onto this T6 conversion. This one is birch ply throughout. STX coilovers, REVO remap, bespoke Leather upholstery, in-house designed and built furnitute, Reimo roof. Soon be finishes and I'll upload the completed conversion photos,
 
Lovely brand new 6.1 in for a few weeks, audio upgrades, wheels, suede lining, fancy headlining, diesel heater etc. Working on deadening the doors and sound diffusing to
ensure the speakers have the best possible output.

IMG-20211124-WA0002.jpgIMG-20211124-WA0001.jpgIMG-20211124-WA0006.jpgIMG-20211124-WA0010.jpgIMG-20211124-WA0011.jpg
 
Last edited:
Here is a rear shot of our birch ply furniture showing the reason we have a vent for the fridge. This allows the cooling fan to draw air over the cooling fins to ensure efficient fridge running. You don’t really see this vent but we ‘fancy’ it up anyway!! ;)

Fridge vent.jpg
 
Been busy with conversions and pods lately, here is a standard pod for T5/T6 which sits behind the driver’s seat. Housing single burner hob/sink combo and a CRX 50 fridge this sits nicely with a full width bed in the rear.
Many colours available and edge finishes, we particularly like the bare oiled birch edges.

View attachment 137333

View attachment 137334

@Eclipse Custom Vans do you guys do anything for a SWB Kombi? behind the rear seats, fixed to existing tie-down points, for over one side?

cheers
 
These Alpine speakers definitely seem to be taking off
Yeah, they are a good plug and play system. I have heard better though and I dont particularly like the A pillar grille as too blingy. Nice overall though, a clean solution and vast improvement over stock speakers:thumbsup::thumbsup:
 
Here is a recent ‘day’ van conversion to a brand new T6.1 204BHP.:thumbsup:
  • Full leather
  • Suede headlining throughout
  • A/B pillars suede
  • RIB 150cm
  • Wheels – Rotiform
  • Alpine audio kit
  • Focal Rear speakers
  • Full deadening
  • Ceiling LED pelmet lighting
  • Front Sport seats upgrade
IMG_20220107_162906.jpg

IMG_20220107_171448.jpgIMG_20220107_171500.jpgIMG_20220107_171516.jpgIMG_20220107_171606.jpgIMG_20220107_171611.jpgIMG_20220107_172348.jpgIMG_20220107_172452.jpg
 
Here is a recent ‘day’ van conversion to a brand new T6.1 204BHP.:thumbsup:
  • Full leather
  • Suede headlining throughout
  • A/B pillars suede
  • RIB 150cm
  • Wheels – Rotiform
  • Alpine audio kit
  • Focal Rear speakers
  • Full deadening
  • Ceiling LED pelmet lighting
  • Front Sport seats upgrade


View attachment 141629
those bolstered seats look awesome, nice work!
 
I really like that oiled birch ply edge look. How much would it weigh for a LWB camper conversion? Or would you have to use poplar ply to have a reasonable payload left?
 
Back
Top