This recent bespoke conversion to the ever popular VWT6.1 turned out fantastic. SWB van with Reimo 3000 bonded seat system provides challenges with available space. However we incorporated soft close drawers and doors throughout, a portaloo, electrical system, 50l fridge, water syetm, it was a tight fit. Through many discussions with a discerning customer we listened to his ideas and produced this awsome finish. Although we are booked up for many months we would love to hear from you to discuss your ideas

WM1.jpg

WM3.jpg

WM2.jpg

WM4.jpg
 
One Piece 12mm furniture grade ply floor available. We have these for SWB, LWB, Kombi 2+1, triple seats, and twin sliding doors. They are full length and fit perfectly with OEM side step and rear threshold. We use these in all of our conversions and we supply to trade and retail customers. Collection only due to size unfortunately at this stage but could ship multiple for trade customers if needed at cost.

Currently £135 + vat but this can change due to ever fluctuating ply raw material costs. :confused:
Cheers
Ian

F2.jpg

F4.jpg
F1.jpg


F3.jpg
 
Hi All, here we have an example of our boot units. These are removable, fit into the exiting floor mounts, birch ply with exposed edges and have 2 x sliding drawers. The drawers are specified to 72KG per drawer but he guy standing in the drawer on the photo is 95KG and they operate fine. The drawers are also lockable in and out.

This particular unit is designed slightly higher but the standard ones are 20mm less height and align more closely to the folded Kombi seat.

We can make these with 2 drawers or one large drawer with cooker etc if needed.

Thanks,
BB1.jpg

BB3.jpg

BB4.jpg

BB6.jpg


BB7.jpg

BB8.jpg

BB9.jpg

BB12.JPG

BB11.jpg

BB10.jpg

BB13.jpg
 
REVO have an sale on throughout October giving , up to 25% off remapping software. All pricing is listed on the REVO website or get in touch and we can advise/book you in accordingly. This is for all Transporters, T5, T6. T6.1 .



All the best,

Ian2021 October Sale GenericMore Power FB.jpg
 
SLIDING SEAT - BED - REIMO 3000 INSTALL

Here is one of our recent REIMO 3000 track seating system installs (not completed yet of course). We have undergone vigorous training and have invested in the specialist tooling required fit these bonded seating systems to your van and can therefore can supply and fit for trade and public customers. You can then take your van away, remove the seat and build your conversion around the seat.

These seats slide the full length of the van allowing the 3 rear passengers to sit comfortably directly behind the driver if required when on a journey. This leaves a huge load area in the rear to carry everything you need, away from the passenger. When stop at your destination – simply unload the gear and slide the seat to its fully rear position to give you a spacious living area.

The seat can also be removed completely if required, simply through the side door when you need more of a ‘van’ thank a camper. You can also purchase the additional single seats and fit to the sliding rail on LWB models. Making your campervan a full 7 seater.

The seats are also super safe as they have been through in chassis testing and complies to the latest European standards.

Due to the specialist training and tooling needed we can supply and fit only for trade and public customers.


IMG-20211012-WA0000.jpg

IMG-20211012-WA0001.jpg

IMG-20211012-WA0002.jpg

IMG-20211012-WA0010.jpg

IMG-20211012-WA0011.jpg

IMG-20211012-WA0009.jpg

IMG-20211012-WA0003.jpg
 
Last edited:
It’s not just campers we do, we can undertake various furniture builds or kits, designed and manufactured in house on our 10 x 5 CNC machine.

Here is a Summer house kitchen we designed as a flat pack kit for our customer in Weymouth. They chose red units with cream interior, all birch ply HPL finish.

We can supply floors, ply panels, flat pack furniture kits, PODS etc etc. Get in touch if you need anything.

Cheers, Ian:thumbsup::thumbsup:

Summer House (2).jpg
 
We fitted an SCA roof and lined out around this guy’s caravelle seat system to this vehicle last year. They wanted his speakers fitted in the rear so we created these speaker pods to allow fitment. He was a climber so wanted to store his kit in various places hence the additional D rings dotted around. The floor around the tracks I tricky but turned out well.

Cheers

Ian:thumbsup:


20141122_152510.jpg

20141122_152610.jpg:thumbsup:
 
This chap had a T4 and was a fan of Marvel comics, We designed this conversion around his existing seat and large JBL subwoofer, no hob, but a beer fridge was needed. The Marvel headlining makes a welcome change and a burst of colour compared to standard suede, carpet headlining’s.
Cheers
Ian :thumbsup:

2.jpg

4.jpg


6.jpg

1.jpg

2.jpg
 
Elevating Roofs.
We have been fitting elevating roofs for many years and have chosen to use, for various reasons (in our opinion) the best roofs available, this is not just the quality of the product but also the quality and size of supplier in case a problem is encountered. The roof is a very important part of the conversion and needs to be a good product and also fitted correctly to avoid many problems down the line.

These days we fit mainly REIMO, SCA and Skyline roofs, here are a few examples.

Get in touch if you would like one fitted
cheers

R0013511.JPG

Reimo Roof 2.jpg

R0014165.JPG

SCA1.jpg

20200316_144420_HDR (2).jpg

P1060396.JPG
 
Back
Top