CTEK doesn't fit

[Alanmh]

So annoyed with myself. Rejigged all the electrics under the drivers seat. Put the drivers seat back on and the 2 wires out the top of the ctek foul a bar under the seat.
Any thoughts as to cutting away the insulation on the ctek sense wires and making god with hot glue or do I need to move the consumer unit?

 

[Big.mac]

Can’t quite see what is to the left of the CTEK. Could you mount both that and the CTEK horizontally instead of vertically?

 

[andys]

I was going to say that too, my Ctek is mounted flat to the floor.

 

[Alanmh]

Can’t quite see what is to the left of the CTEK. Could you mount both that and the CTEK horizontally instead of vertically?

It's a Victron smart shunt. Might be able to get the ctek underneath it. Will look tomorrow. Thanks!

 

[Alanmh]

All sorted now. Apologies to @Big.mac its not the Victron shunt you can see its the fused spur for the mains battery charger. I have had to put this on the outside to make it all fit, but its not in the way.

Happy now - bigger battery and added fuse to battery feed to rear fuse box that "professional" converter didnt fit.


I know its a bit tight - will probably moe the shunt when I can get a longer battery lead.