Cable routes vehicle battery ->under passenger seat(UK driver seat) T6.1

[M.Nymberg]

Looking for help on which route i can take with charging cables for vehicle battery from under passenger seat(UK driver seat) in our Cali Beach T6.1. Anyone who might have done this? I dont want any drilled holes etc if possible.

 

[Deaky]

Search results for query: Cable route

www.t6forum.com

 

[Steve Hales]

I took a cable from the battery through an existing hole behind the glove box and then under the rubber floor in a channel to the passenger seat, from there there was another channel to the driver's seat.

 

[Ian Secker]

I took a cable from the battery through an existing hole behind the glove box and then under the rubber floor in a channel to the passenger seat, from there there was another channel to the driver's seat.

Just starting my liesure battery install T6 using a ctek D250 se BtoB charger. Do I need to run a ignition feed to the Ctek.

 

[Sim60]

Yes
( although it will provide some leisure battery charging if the starter battery/ alternator voltage is high enough)

 

[Sim60]

I piggy back a fuse from the centre row of fuses in the centre console in my t6 - there’s lots of info in the archives

Simon

 

[Ian Secker]

Yes
( although it will provide some leisure battery charging if the starter battery/ alternator voltage is high enough)

Thanks steve

 

[Ian Secker]

I piggy back a fuse from the centre row of fuses in the centre console in my t6 - there’s lots of info in the archives

Simon

Thanks Simon
Do you know if there is a link to pulling the dash to get the fuse board out?

 

[Sim60]

Access panel just pulls off from the centre console

 

[Sim60]

Here’s what it looks like inside

Looks like phone has decided to rotate pic by 90 degrees

 

[Ian Secker]

Here’s what it looks like inside

Looks like phone has decided to rotate pic by 90 degrees

View attachment 149566

Simon that's great, was thinking fuse board had to come out Thanks