BCM Pin sizes
- Thread starter KennyW
- Start date
Thats very kind, gimmie a mo to figure out how to DM.
Hello everyone,
(Tried searching but couldn't find the exact answer - sorry if it's already documented somewhere - please point me to it).
Can anyone confirm the correct crimp size to add a pin 3 connection in the black connector on the BCM plug please?
I ordered and tried 000979009E, but these are far too small for pin 3.
Many thanks.
(Tried searching but couldn't find the exact answer - sorry if it's already documented somewhere - please point me to it).
Can anyone confirm the correct crimp size to add a pin 3 connection in the black connector on the BCM plug please?
I ordered and tried 000979009E, but these are far too small for pin 3.
Many thanks.
this is all available numbers
000 979 009E
000 979 025E
000 979 026E
000 979 027E
000 979 044EA
000 979 150E
000 979 151E
If 009 is too small, should be
000 979 025E for 2.8mm wire
or
000 979 150E for 1.5mm wire
000 979 009E
000 979 025E
000 979 026E
000 979 027E
000 979 044EA
000 979 150E
000 979 151E
If 009 is too small, should be
000 979 025E for 2.8mm wire
or
000 979 150E for 1.5mm wire
Hi,
Thanks for the information.
It wasn't the wire size that was too small. The crimp I ordered (009) was not retained in the plastic housing - the body of the metal crimp was too small for the housing and the pin in position three on the BCM was too large for the 009 crimp connector.
Is the 025E and 150E a bigger crimp body as well as accepting larger wire do you know please?
Kind regards,
Thanks for the information.
It wasn't the wire size that was too small. The crimp I ordered (009) was not retained in the plastic housing - the body of the metal crimp was too small for the housing and the pin in position three on the BCM was too large for the 009 crimp connector.
Is the 025E and 150E a bigger crimp body as well as accepting larger wire do you know please?
Kind regards,
000 979 025E for 2.8mm wire - so can handle for example up to 20A
000 979 150E for 1.5mm wire - so can handle up to 5A
both this same size , only for different wires
simple google them, and compare with existing you have in near hole
000 979 150E for 1.5mm wire - so can handle up to 5A
both this same size , only for different wires
simple google them, and compare with existing you have in near hole
Hi Pauly,
Yes, that's the correct one.
(It's actually pin 3 on the black connector (engine running signal) I am trying to use, but that is the correct size one you have highlighted on the white connector).
Very many thanks for the kind offer to post a couple. I'm more than happy to pay you for the crimps and postage if you want. I'll send a PM now.
Kind regards,
Yes, that's the correct one.
(It's actually pin 3 on the black connector (engine running signal) I am trying to use, but that is the correct size one you have highlighted on the white connector).
Very many thanks for the kind offer to post a couple. I'm more than happy to pay you for the crimps and postage if you want. I'll send a PM now.
Kind regards,
There is no part number for crimps as VW don’t sell them anymore, you can only buy repair wires now
Without looking it up I’m guessing pin 3 is the smallest connector so the crimp is the square type
Without looking it up I’m guessing pin 3 is the smallest connector so the crimp is the square type
Audi VW Skoda Seat Porsche 10 x Wiring Crimp Repair Terminals Pins 000979009E | eBay
Find many great new & used options and get the best deals for Audi VW Skoda Seat Porsche 10 x Wiring Crimp Repair Terminals Pins 000979009E at the best online prices at eBay! Free delivery for many products.
www.ebay.co.uk
From post #1 the 000979009E were too small for pin 3, I think they may be for the tiny connections running either side of the centre.
Can you depin a matching connector and take a picture of the terminal?
Do they look like any on here.. 1.32￡ 19% OFF|50 Pcs 2.8/3.5 MM Crimp Terminal Auto Electrical Male Female Wire Splice Pins For FCI/TE/Tyco/AMP/Boschs Car Connector|Terminals| - AliExpress
Can you depin a matching connector and take a picture of the terminal?
Do they look like any on here.. 1.32￡ 19% OFF|50 Pcs 2.8/3.5 MM Crimp Terminal Auto Electrical Male Female Wire Splice Pins For FCI/TE/Tyco/AMP/Boschs Car Connector|Terminals| - AliExpress
Last edited:
If nobody has the pin details I'll depin and get the pin dimensions.
I think that is a N 907 647 01
Quite probably as just the crimp but VW only sell the repair wires now.
Bit more time now so had a quick check, pin 3 is the smallest of the rectangular shaped crimps
The repair wire part number would be 000979025
Heres an ebay example of the crimps
The repair wire part number would be 000979025
Heres an ebay example of the crimps
10pcs Wiring Crimp Repair Terminals Pins 000979025E Fits Audi VW Skoda Seat Tyco | eBay
To fit many models of VAG Group: VW Porsche Audi Seat Škoda. Series VW: MCP 1,5mm. suitable for making wiring repairs to vehicle's electrical wiring. Standard: RoHS, EC ELV. Material: Tinned Copper - Best Quality.
www.ebay.co.uk
Pins are from TE MQS range or MCP range. You can order them from RS, but the crimping tool is £300+, which is probably why VW only sell crimped wires.
