I am planning on adding some ambient and courtesy lights. This is what I want to add at the moment.
2 courtesy step lights for the front doors.
2 courtesy lights in the front front footwells.
2 ambient lights in the front footwells.
2 ambient lights on the rear of the front 2 seat bases.
I am wondering where the best place is to connect these lights to without causing too large currents in the OEM loom.
I already have a courtesy light wired into the slider step, this one is connected to the front if the 2 ceiling lights that were in the OEM panels (OEM lights now removed.)
I know there is the white connector behind the glove box. Will these cables be ok to tap into for the 4 courtesy lights
As for ambient light is the wires to the switch capable of handling the current for the 4 planned ambient lights? TIA
2 courtesy step lights for the front doors.
2 courtesy lights in the front front footwells.
2 ambient lights in the front footwells.
2 ambient lights on the rear of the front 2 seat bases.
I am wondering where the best place is to connect these lights to without causing too large currents in the OEM loom.
I already have a courtesy light wired into the slider step, this one is connected to the front if the 2 ceiling lights that were in the OEM panels (OEM lights now removed.)
I know there is the white connector behind the glove box. Will these cables be ok to tap into for the 4 courtesy lights
As for ambient light is the wires to the switch capable of handling the current for the 4 planned ambient lights? TIA
