Abs Ecs Light On After Lowering

rix_1gp

New Member
hi all

Just need advise, had the t6 lowered today, problem is the abs & Ecs light came on?

Sorry if this has been asked, but what you reckon is the issue or better the resolve to this is?

Lowered my t5 and never had any issues, so don’t know

Thanks in advance
 
Your need to plug in a diagnostic to read the codes....

Like VCDS . Carista. Autel.... Etc Etc.

Lowering shouldn't have caused any issues unless modules or sensors have been unplugged with the ignition on. Or left unplugged completely.

Possibly one of the abs sensors unplugged.?
 
Is the steering wheel pointing straight ?
If tracking/alignment goes to far off the centre you will get a steering angle sensor fault and that causes ABS/ESC to shutdown

As above a fault code check will tell you for sure what is causing it
 
Back
Top