50 mm h&r

[Yeti899]

so looking at these springs for bitdi dsg t32, obviously should get the heavier springs according to the chassis plate! But Does anyone out there run the softer ones on there t32 if they are not carrying much weight???
I understand the whole insurance/load capacity issue but just want to know what they ride and look like??

 

[Stuart Nightingale]

I have the same dilemma! I use my T32 as a family car so it never has any weight in it and so the drive is quite hard, from what I have read the B14 set up is the way to go.

 

[8balladdict]

I'll be changing from my 50mm H&R's to the B14's....once my bank balance has recovered from all the bits n bobs I've done already. Only had it 3 weeks.

Can't advice on ride comfort I'm afraid as I bought the van with the springs on so can't compare it to anything else. Don't know which ones I've got either, assuming it's the heavier ones. But, wouldn't say the ride is overly hard....defo not uncomfortable anyway. But it's better now I'm running 20" wheels though!

 

[Buggirl]

I am getting b14s in August! Can't wait!