4 Wheel Alignment - What's Next?

[LSNE]

OK, so I had my van lowered and put 20" alloys on last year, a matter of months later and the inside of both rear tyres were shot.
I've put new tyres on and had a Hunters 4 Wheel alignment carried out.
The rear camber is still out and the front caster is also out.
Will these cause any issues? If so, what are my options to fix?

Cheers

 

[Dellmassive]

Bit more info here 》
Lowering & 4-wheel Laser Alignment - How I Done It -

.

 

[Northern Monkey]

@T6180 @Tourershine

 

[Tourershine]

I had exactly the same issue @LSNE

If you read through this thread, it fixed my problem Lowering And Wheel Alignment Issues? thanks to some insight from @highwaycollective

 

[Littleblackflash]

I wouldn't worry about the extra caster on the front. It won't cause any tyre wear. I don't think you can adjust the rear camber, only the toe in. The tyres wear out because of the toe in, not the camber.

Looking at the amount of toe you had on the rear I expect the tyres would only last 5000miles. I expect you've solved wearing the insides of your rear tyres now the geo is done.

 

[LSNE]

Thanks for the replies lads.
Hopefully the wheel alignment alone will do the trick.