10j et40 with 255/40/20 fitment?

Andyham105

Member
T6 Pro
Looking to replace my current wheels that came on my t6 t28 (range rover alloys in 20" on 255/45/20)

I have found a set of bmw wheels I like the look of however waiting to check load rating of them. They are 10j, et40 x 20" and I have x4 255/40/20 tyres already knocking about i would plan to put on them, will this setup fit without any issues, it's soon to be on st-x coilovers sitting reasonably low too.

Any help is much appreciated!
 
Looking to replace my current wheels that came on my t6 t28 (range rover alloys in 20" on 255/45/20)

I have found a set of bmw wheels I like the look of however waiting to check load rating of them. They are 10j, et40 x 20" and I have x4 255/40/20 tyres already knocking about i would plan to put on them, will this setup fit without any issues, it's soon to be on st-x coilovers sitting reasonably low too.

Any help is much appreciated!
There’s quite a lot of poke when rubbing 10” ET40 on the front. We’ve tried it as an experiment for a customer and decided against it.

Here’s a pic or two of how it looked with 255/35 20 tyres.

34A56386-7898-41C4-BB24-95B5CF62C8C0.jpeg30B37F41-EE98-42F1-9F5C-F07F89C7945B.jpeg

The van is on Solow suspension, so much lower than you would be, but it gives you an idea of how the wheel would poke.
 
Thanks for that. It won't be as low as that as not sure the St x go that low.
What would you sudgest I'd the best combination..
 
Back
Top