10.5J 20” Alloys?

[Carl1974]

Will 20x10 and a half j fit on a t28. Seen some wheels but states for Audi and merc?

 

[MatT6]

assuming the PCD is correct it would depend on the offset (ET)

 

[Tourershine]

Will 20x10 and a half j fit on a t28. Seen some wheels but states for Audi and merc?

Audi and Merc are 5x112, VW are 5x120. Plus 10.5" fronts are a bit too wide unless the offset is pretty extreme. Max fronts i'd go personally is 9" or they can often poke out too much and look daft.

 

[Carl1974]

Cheers gents, this is all the info I could find on the wheel.

 

[Stevefrs]

Is there nothing on the spokes showing Et xx? Only load rated up to t30.

 

[Carl1974]

Nothing, I’m going to look at them this weekend so will update you.

 

[Carl1974]

Is this any good.

 

[The Van Cave]

Is this any good.

View attachment 59351

Fitment looks OK if they’re for the rear, but you need to know the load rating. They are hugely wide for the front though.

 

[Carl1974]

Cheers Chris.

 

[Carl1974]

Hope this helps.

 

[Carl1974]

They are all 10 and 1/2j. Not sure what my assasins are.

 

[Village]

10.5 et30 will not fit on the front i dont think, unless you like a bit of rub...