Search results for query: *

Thanks mate

No the bonded Reimo system is tested in all six seating positions and is the smoothest of them all in my opinion, and you also sleep on the reverse of the seat like the rib, but the seating height is a lot lower

thinking of putting the comfort dash in my new kombi does anyone have any part numbers for the complete job, and how difficult it is cheers

Not sure on the connection of the ignition supply if you don't connect it, how the system functions, it is a European thing I believe, that everything turns off when the ignition is turned on. So we always wire it to the manufacturers instructions. Obviously the fridge and I few other items will...

No I'm sure that is fine which ever you find easier as long as it's a 3 amp fuse that you attach

Oh and you want a inline 3 amp fuse close to where you connect your ignition supply power supply end i.e. Back of fuse box or under passenger seat

Yes mate, fitted a few since then you just want a ignition supply if it's a T5 you can pick it up under the passenger seat or I pick it up from behind the fuse box if it's a T6 or behind heater controls don't cut any cables just use a splice clip, cable from B2 from power unit B2 don't bother...

Going to Reimo in November will ask the question if I can see one fitted as not sure what model it is you are talking about, at the moment we only fit the easy fit Reimo roofs, regards the height of the 3000 system it is the same I think as I haven't got one to measure as we don't fit the 333...

The Reimo bed if you have it as far over as possible to the sliding door you have to flatten the wheel arch very slightly which you can't see when it's carpeted, this then allows you to get wider units in.

Yes the REIMO 3000 is lower than the Rib bed and not that I've seen them installed but i could only think if they are adding something to the lower frame it would only make it higher on the flux, again roofs me personally I wouldn't touch any roof other than SCA or Reimo name me a roof that is...

I'm a authorised installer for the Reimo 3000 bonded system and for the Rib bed both well made Reimo is expensive specially the bonded system as it's £25 cost price for a tube of the bond and you use 15 of them so that's £375 just for sticking the rails down, but the way it glides up and down...

keaney the 3000 system is head and shoulders above the rest so versatile id have it everyday over anything else any questions you want answering give me a shout

Just use a black Matt spray paint is fine been doing the same for 5 years never had a problem leave a slight gap at the bottom for displacement of air and condensation to get out.

Hi All we are authorised fitters for SCA and we deal direct just like Banwy do we have been fitting SCA roofs for over 5 years and never had 1 complaint www.sherwoodcampers.co.uk

i agree they do seem a bit poor

yes thats right mate

Sherwood Campers mate its my Business

Hi Dino Spray the back of the dummy window as well mate or when the sun catches it at different angles you will see through it so any untidy primer lines etc would be seen, i always just leave a small gap at the bottom for displacement of air when bonding the window on few inches

yes mate sorted it, i don't have a problem normally pick it up under the passenger seat all wiring has changed on the T6 euro 6 due to the regenerative braking etc, but thanks anyway, i see the T6 forum shared our demo van pictures thank you ;-)

Hi all fitted CBE 210 kit to my conversion on this system you need a ignition live to turn the system off when the ignition is on, so i linked this to a cable under my passenger seat, light blue with yellow band which gives 12v when ignition is on but its making the relay on the 12v cbe box...