Search results for query: lowering

I've tried 55mm lowering springs on my setup, which helps a lot with staying under 2m. Experiment with different spring options for the best fit.

I’m no suspension expert, so what I say could be a load of Botox. But if the arse is sagging due to weight and not because it’s actually been lowered, then that needs addressing before you start messing with the front. There’s a world of difference between a van that’s been lowered and one...

Yep, that’s what I was trying to say. It lowered the beam.

I'm after a lower rubber door stop (part in picture in yellow) The price of them is at best expensive, anyone know or any cheaper options.... currently looking at £15 inc postage.. Ta

Hi, Has anyone got a lowered seat base for when fitting a swivel seat to maintain the original seat height please? TIA

There's a single screw on the underside of the upper glovebox that needs to be removed in order for it to be taken out - pretty sure this can only be accessed by dropping the lower glovebox so it may be easier just to tackle the lower one (not so easy for your back tho!) The first bit of this...

VW677 are VW's "Sportline" springs, made by Eibach - approx 30mm lower than standard

Hi, yes I have a Caravelle too and used them with standard lowered springs. They should work for lowering between 20-80mm I think. They don’t work if you are not lowered. Feel free to double check with the suspension experts on the forum.

Depends how it's been lowered as to whether that adds value. If it's got a set of 40mm lowering springs then it will drive awfully and you'll then have to shell out £1500 ish to get it lowered properly. So make sure you know what has been done to it exactly. Similar thing with alloys. Only adds...

Who is stating this ?

60mm lowered! That’s amazing! So they’ll definitely fit mine then - thanks so much!

Im looking at putting some all terrain tyres on my T6. Its lowered 50mm. The garage gave said they reckon the 255/55/18 will hit the arch and rub. Does anyone have any experience with this? Are 235/55/18 an option?

Nice. Want to do the same to my roof and some extra bits. Do the extra extra door seals, makes a big difference to lower noise.

I have a lowered all seasons T6.1 with Leighton front splitter will I get on and off the ferry ok?

The 1st pic was my pure grey SWB lowered 40mm on 20s. It was sitting too high for me and the ride was poor just with lowering springs, so its now 70mm on coilovers. Hopefully some inspiration for you!

Sliding swivel with lowered base.

Thanks Phil

Its easy to determine how low the van is , take a tape measure from the centre of the wheel vertically to the top of the arch , =Standard it will be 460 mm if its 420 you are 40 mm lower and so on

I’m on 245/40s (Nankang) lowered on MTS coilovers and its drives like a dream. Had a go in a fully converted van on 275/40s lowered on just springs and it was awful.

Does anyone have one for sale?