Search results for query: lowering advice

Nice plate. . . It’s my name too

A short hop down the M6 to see Steve @CRS Performance , he's good at advice and all things suspension!

Hi, I’ve got the exact same problem with sliding door on my T6 after replacing the lower rollers. Did you find a solution. Thanks!

After some advice. My rear tyres were replaced in March last year I bought eagle F1 and had them fitted. Since then I’ve covered approx 5000 miles give or take and now both are less than 1mm tread and needing to be replaced again. My van is lowered and I have rear wheels which are...

Yes! half arsed job doing it springs only - terribly crashy. I'm also waiting for the opportunity to do the job properly.

Ps now I have 4 Clayton wheels and tyres filling my garage

Hi and Welcome to the forum. A few answers to your questions above that will hopefully help. 20x8.5 ET35 on the front is no problem at 50mm lowering. It's a good offset for that size on the front and in theory will work with both the 255/40 and 265/40. Be aware though, that the 255/40 isn't...

Will depend on your spec: I've got the 250A monster in the Caravelle as it's electrically heavy with all the driver assistance stuff. As a general rule keep the "house" load to about a third of the rated capacity - you need a lot for things like heated windows and fans and remember that at...

Hi Jay We can give full advice on what works and what is best for your exact vehicle - DM you contact details and we can have a chat We stock over 25 sets of wheels so have plenty of choice but can also sell wheels from whole of market Oli

Hi completely new to van life so need a bit of advice please. We have recently put a deposit down on an upgraded Startline Factory Kombi. It has Satnav, Rear Parking sensor/camera, Aircon and a rear heater fitted. I’ve noticed that the front single seats don’t have armrests though and have been...

Thanks for your advice! The fronts have the top mount mod also, but at its lowest it's around 80mm I think? I've raised it up slightly now to even it out with the back more. There's nothing loose that I can see. Since having it aligned, I'd say the noise is better but it still seems louder than...

That’s your van’s way of telling you to replace the whole lot with a lowered setup from CRS. Don’t forget when one spring snaps the other won’t usually be far behind.

Eminently sensible advice...

This is all too common , Suppliers who dont know the limitations of the products they sell. "One kit fits all" works for socks not for Campers for sure Happy to talk you throught some common sense options , we have the biggest range of solutions and over 4500 vans under...

Have you gone throught the Team Mojave thread? Should be some wheel inspiration there, at least for colour. https://www.t6forum.com/threads/team-mojave-beige.831/

Hi there, I'm new here and getting familiarized with the forum. I've recently bought late 2017 T6 Shuttle (It's called Caravelle in Czech market so I may refer to it as that). I'm not sure if it's Trendline or lower trim, but it has all we could ask for. Except for missing AC in the back and...

Interesting comment about the soft close thing. So I would expect the vents to be fitted in all cases since it's all about air pressure control. My thought is why would VW not fit the pressure vents on a van with soft close, since it would mean a completely different panel to be produced costing...

Did you get this resolved?!

Hi all, first post on here and just read the the entire 42 pages currently on this thread. Thank you for all the info and advice so far. I'm looking to replace some Wolfrace Dortmund 18x8.5" ET42 gloss black wheels & 235/55R18 tyres on a T32 4Motion but I wanted a few things from the new...

I'm looking for opinions / advice. I have broken the very bottom of my nearside front spring. The original spring has 2 x green and 1 x grey mark. I'm not sure of lowering it or keeping it standard but I am unsure of what 'factory' spring they are. For info I'm running 255/45/19 tyres / rims.