Search results for query: Cable route

Thanks, thats interesting. My thoughts about the polycarbonate are that the holes in it are not that big and fairly quickly could end up full of dirt/crap so not cooling as effectively as just left empty with one thick bead of sikaflex. As you went with a top mounted connection box on the...

This is how far I got with the cabling last night. Scanstrut gland on, 14-15mm diameter hole from hilo poptop into main van area, then cables rooted along soffit to B pillar on drivers side (electrics under drivers seat), but not routed behind pillar yet, because I didn't have the necessary...

Victron Energy SMART BatteryProtect 12/24-Volt 65 amp little use, was installed when i was running AGMS, BT version. ++++++ RRP £45 £20 collected + shipping ++++++ ++ https://www.victronenergy.com/battery_protect/smart-battery-protect ++ One of the best ways to shorten the life of...

Just bought a Miofive dash cam for the T6.1. Planning on fitting it next to the rear view mirror. Initially thinking of using the 12v socket on top of the dash before going down the hard wire route. Thinking of feeding the cable up in the headlining and along to the drivers side pillar. Coming...

Very useful. Mines converted and got some fancy roof lining with lights in so I really don’t want to butcher that. I’ll have to see how simple it’ll be to feed it I guess!

It was the first time I'd tried fitting one myself and went quite well. Mine is a T6 work van so I didn't have to remove as much trim. I mounted it on top of the old rear view mirror and just used a pry tool to push the wires up behind the head liner trim along the top of the windscreen and...

For me yes. I had to slightly scribe the middle section and the right hand side section as my roof inside trim drops down further as you go towards the rear of the van. Then use cabinet blocks to fix into the timber along the top and then finally screwed the right hand side into the actual...

No I went from the 'battery' (technically a PPS Portable Power Station) into the C pillar (the one behind the sliding doors that the lights are mounted to) then up to the first light on the passenger side, then back into the C pillar and up over the roof above the panelling in the insulation...

So I just had mine installed In a T6.1 Cali Beach (twin sliding doors) at the same time as solar. The EF AC cable was too thick to route alongside the solar so they routed each down the different sides of the vehicle. I suggested the same thing (only route positive). They said they’d try to...

yes you can do that, black cable to chassis and red to starter battery. . . . with fuse on the battery connection. you can cut the cable sorter aswell . .

Just about to take delivery of the Ecoflow 800w Alternator charger. Thinking ahead about the cable route from the engine bay to under the driver's seat (in my case LHD T6.1 Shuttle), I was after your thoughts and opinions. The charging cable that comes with the charger is a somewhat thick loom...

Hello, I want to install some work light on my van. In specific I want to install Lazer utility 25 maxx: These lights works with 45W. I want to instal the light in the rear of my van (MAN TGE) and I want to route the cable from the rear pilar to the bottom of the van until the bonet (where I...

I've not started the pipework yet, I will be sending one out each way (Left & Right), I think I'll probable fit them to the back of the fan cowering with big black cable ties and ensure nothing can touch any part of the engine to prevent chaffing. I'm STILL waiting for my new intake manifold...

Thanks. I do have the rubber front boot thing on the roof, under the front of the pop top. On my previous, none pop top t6, I had a shark fin fitted to the roof. Hence I thought the aerial I have linked to would do just as good a job if mounted to the rear door. I’ll ask my local guys and get...

It’s a Ctek d250se so maxes out at 20A but I also have a lithium battery with built in monitor so can see how much it’s being charged. Or could there still be more current drawn into the b2b charger even if not pushing out? The fuse is about 1ft after the terminal and I think like 30A but would...

If you are using a gland I’d strongly recommend Scanstut. Not cheap but they are simply the best. I routed mine outside the canvas at the rear and the cables enter the van through the gaiter at the top left of the tailgate. If you have any access through the canvas (some have a Velcro join but...

Hi all, I am thinking of mounting a solar panel to my pop top roof. I have a stealth roof so it has ribs. I am undecided if I want a back entry junction box or if I would be happy with a low profile top mounted junction box as I have roof bars so it’s not like I need a discreet panel but do...

Some Landrover Products are rated at 3500kg and some Toyota Landcruisers also where not sure about recent versions. Authorities here in Wales occasionally target vehicles towing. They check on conditions tyres and such, weights, hitch weight and so on. I have seen them pull over vehicles some...

For your DC-DC consider the Victron Orion XS - it's got a higher peak charging current if you are going for such a larger battery and I think it's physically smaller and runs cooler too. Operationally if you are managing the smart shunt and solar through the Victron app you may as well manage...

Massively useful info, thanks.