Search results for query: Sliding door fuse

I'm thinking about selling my day van / removable rear kitchen camper conversion. Please note I didn't get the kitchen pod fitted in the end, and there are a few final minor works required. The intention was to get this done myself and enjoy the van for a few more years, but circumstances have...

@Pete C i totally agree - I've had up till now everything available fuse wise from either the front or the back of the seat. @Dellmassive here are a couple of shots. basically i have a victron solar mppt (not shown) and victron shunt that i'd like to house on a central board close to the battery...

long story but my side step light is not wired in and I plan it doing it this weekend. I am taking out the double swivel seat to replace it with one from Ms Craft so that means I can easily run a feed from the fuse box in the passanger footwell. Which is the correct fuse for me to take a feed...

Hi all, I’m after some help! I’ve searched and looked through lots of the downloads but can’t find the answer. There is a 12v cigarette lighter socket just behind the sliding door on the drivers side and it’s not worked since I’ve had the van. The front socket and the one by the tailgate work...

Had further issues over the last few months but not had much chance to look at it. This time, O/S sliding door is doing nothing at all!! No lights on the dash button or sound of movement from the motor. Hooked it up to VCDS today and no response from the module on this side. Checked the fuse...

very nice . . . post those pics over here too . . . https://www.t6forum.com/threads/seat-base-electric-ehu-solar-install-how-we-done-it.25368/ .

Hi, van will be for sale soon but could do with some help as I’m unsure on what to price it, would be plus vat too. Located north Shropshire. Rough Spec is, T6 2018 102 5 speed swb highline 40050 miles will go up slightly Rear sensors, AC, heated front/rear screens Caravelle set up, 4 captains...

So as VCDS has arrived and i have a quiet afternoon I've began the learning process! please be gentle! Battery voltage is 12.8v confirmed that the voltage is good to the main fuses under the battery and the earth is good to the earth point alongside the fuses. LHS headlamp has been removed to...

@travelvolts I don’t think so but I’ll double check everything this evening. As far as I’m aware just the passenger side behind the sliding door and then in the drivers side boot at floor level next to the cooling vents for the heater in the wheel arch trim. @Loz I was wondering though if VW...

A number of us have fitted a Bluetooth battery monitor to keep an eye on the battery. Never had an issue with the internal lights causing a. Problem. Battery Monitor BM2 device for Cars & Campervans 12V Battery/leisure battery tester Compatible with Android iOS and Ipad with bluetooth 4.0 and...

Thanks @IestynD, I'm strictly amateur but I like to have a go, I'm sure it could be installed better... I wanted a permanent outside light, so I ran the basic principle past the more knowledgeable bods on this forum with generally favourable responses, I used very slim metal track with sliding...

Can you post full autoscan?

T6 LWB 2016 66 plate 2.0 tdi 150 - 6 speed manual - 32000 miles only - euro 6 - T30 Kept in a garage other than trips away and never used as a daily driver. Registered as a Motorhome on the V5 Full custom 4 berth camper conversion from a panel van. Ready to go and kitted out for all season...

Hello, under the left seat there is power directly from the power rail, in E-box (fuse SA3 - 60, 80 or 100 Amps, depending on the equipment), in my Caravelle there is power to the additional 12v socket on the left C pillar, it could be a sliding door power supply , in some variants (army...

Another productive weekend over. Shame I've got to go back to my proper job... Started out by trying the aluminium window surround out before taking the kitchen unit out. I'm disappointed, I didn't think about the window cut out size. The cut out is bigger than the vanshade opening. Poor...

I currently have my 6.1 HL stripped out and installing the wiring. My side sliding door foot step has a courtesy light already so easy for me. Otherwise its back to the Fuse box under the dash or the roof courtesy lights at top of B pillar. I have a bunch of permanently live wires under the...

I have the same setup. The relay "100" is the split charge relay separating starter and second battery. It's driven closed when engine is actually running. Yes. Could even also take advantage of the existing fuse strip (seems to be now empty?). It's also advantageous to use van's earthing...

SH1 - empty SH2 - 30A ???12V socket would require 15A SH3 - SH4 - 15A towbar SH5 - 20A towbar SH6 - 20A towbar SH11 - 25A Aux. air heater control unit or 20A aux. heater control unit SH12 - empty - (electric lumbar support 15A) Power? sliding door control units should have separate 2x40A fuses...

I made up a small back wheel for my bike so I can mount the bike in the back of the van without needing to slide the seats all the way forward. The wheel helps no end with getting the bike in and out. We have a trip to Bike Park wales planned next weekend so this means we can fit three bike and...

Hiya any help appreciated, want to fit my rear aftermarket roof leds in the back of the van.. i have a highline 2018... I want to run off the leisure... but also the norm van battery once the pod main fused rear consumer unit is turned off. so i have a feed from that unit as i had this on last...