Search results for query: "7E0 937 090 HW"

Heres my info Part No SW: 7E0 937 090 HW: 7E0 937 090 Component: BCM PQ25 Max4 H80 0736

Not sure if this is any help - a scan of an early T6 (MY16) in the UK - has left and right electric sliders. ---> RNS510 bluetooth Part No SW: 7E0 937 090 HW: 7E0 937 090 Component: BCM PQ25 Max4 H80 0736

Have added that into the coding comparison and virtually identical to my current coding, all differences accounted for

I've removed 55 from the 19-CAN Gateway installation list, keyed off and then back on again before running a new scan; a fault shows in both 19: 1 Fault Found: 01044 - Control Module Incorrectly Coded 000 - - Freeze Frame: Fault Status: 01100000...

Two steps forwards one step back :( Starting to think my BCM is just not compatible with this mod :cry: I have relearned keys again and this time used the new slide door button to adapt new keyfob and it accepts the fob but the button still doesnt work Looks like i may need to investigate...

Sure; Disclaimer; this is from a few months ago but I haven't changed anything since. Also I posted a thread a while ago about my VCDS nightmare. It should all have been restored to normal but no warranty. My mirrors do fold though :). The excellent guide posted by @Loz and others worked for me...

65Plate PV Address 09: Cent. Elect. (J519) Labels:. 7E0-937-BCM-V1.clb Part No SW: 7E0 937 090 HW: 7E0 937 090 Component: BCM PQ25 Max4 H80 0733 Revision: B9080001 Serial number: 0771 269151942 Coding: A0A4303A0A6134B193284F746CEB8E748FA0708F60CC6D60320400220800 Thanks

Did you get anywhere with this? New lock? A repair?

My previous MY16 van (with HRS) had earlier revision of BCM - no suffix at all Part No SW: 7E0 937 090 HW: 7E0 937 090 Component: BCM PQ25 Max4 H80 0736 The current van (with HRS) has the same BCM as @Dellmassive Part No SW: 7E0 937 090 C HW: 7E0 937 090 C Component: BCM PQ25...

Thanks for a great thread. I am completely confused by this whole thing but its not hard to do that to me. This is the thread I needed to read in the first place. Ignore my thread now, I went to delete it when I finished reading this one but it would not let me as the delete function dissapears...

If you could post a copy from VCDS autoscan as below so we could have a closer look at the codings. These are from two different vans, both having tailgate and LEDs. MY16 Address 09: Cent. Elect. (J519) Labels:. 7E0-937-BCM-V1.clb Part No SW: 7E0 937 090 HW: 7E0 937 090...

Today the van was locked up on my drive and then suddenly the alarm went off. I looked out of the window and the courtesy lights were on. Turned the alarm off, but it wouldnt reset. Went into the van and the icon in the display was showing the van with the drivers door open and wont go out...

2016 VOLKSWAGEN CARAVELLE T6 MULTIFUNCTION STEERING WHEEL VW 7E0419091 | eBay

For reference, mine is: Part No SW: 7E0 937 090 HW: 7E0 937 090 Component: BCM PQ25 Max4 H80 0736 Revision: B9080001 Serial number: 0771 020162016 Coding: B8AC393A0B633492922049646C2B8C548DB0698960CC4960320400BF0800 Shop #: WSC 02737 022 563171 VCID...

Possibly BCM byte 08: Rain/light sensor installed BCM byte 13: Light sensor active Address 09: Cent. Elect. (J519) Labels:. 7E0-937-BCM-V1.clb Part No SW: 7E0 937 090 HW: 7E0 937 090 Component: BCM PQ25 Max4 H80 0736 Revision: B9080001 Serial number: 0771 316150034...

You might be right, but once the bulb out lamp is on, it stays on. I noticed the voltage was low on the logs, 11.6V on Friday and 12.2V today, but as soon as the engine is on it kicks up to 13V. I thought I'd have a look at the voltage as the new CTEK I had fitted with a 2nd battery, might be...

Ok, faults cleared, VCDS unplugged, van doors and bonnet closed and van locked for a few minutes. Unlocked, turned on, Ghost PIN input, clock reset and VCDS scan done - Friday,06,October,2023,16:21:58:26777 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 23.3.1.0...

Cheers Robert - this is the full scan BEFORE I made the changes, but should show the module. The folding mirrors were already checked, but I then selected comfort close. I have since checked again in case I forgot to accept the code, but it's lodged Chassis Type: 7H-VN75 (7E0) Scan: 01 03 04 08...

I've changed the coding as you advise - I've not driven anywhere but lights illuminate as they should. I've done a scan before and after so you can see; yes, there were and are still faults - 09-Central Electrics, with dipped bulb and the 55-Headlight Range, which I presume is me using the HRCM...

Here is my BCM (09) adaptation map (engine running this time): I don't have Excel on this laptop so can't open it to check its readable! and a full scan: Saturday,07,October,2023,12:11:45:26777 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 23.3.1.0 (x64)...