Search results for query: Electrical interface

Thankyou for your suggestions! I went back out to the van to try screwing the little trim plate back on - I had not secured the trim while I was testing it all - but no, still nothing on the dash. I can hear motors from the aircon/ventilation, and the hardwired dashcam powers on, but there is no...

I would start checking if pin 9 of the violet plug fits your purpose. Full documentation of the IS1 interface through a link of the posting ---> Electrical interface...What is it for? The attached "repair wire" fits into the violet plug pin A9.

Looks like factory towbar electrics. Similar setup in a van with factory towbar --> Electrical interface...What is it for? Relay 509 - Diff lock control unit, Relay 643 - Trailer voltage supply.

Factory split charge relay is Relay 100 (+ 80A fuse next to it) in the picture ---> Electrical interface...What is it for?

Hello Everyone, especially to anyone in North Scotland. If there is anyone local to me (Moray), who is good with T6 electrics, I might have a small job for you! I don't usually join fora, let alone pay for premium membership, most are full of junk. But not this one! Of course, there are helpful...

When I got my van I specified the Electrical Interface (IS1) for about £40. I was kinda hoping it would come in useful in the future and for £40, it was worth the punt. I am not electrically minded (at all), but it looks as though it could be quite a cheap, worthwhile item to spec' (if you know...

...And the heating vents will be integral too like the VW campers? Also, the VW configurator wants me to choose either a: Electrical interface and multi-function control module for external use with telematics prep MAX CFCU with terminal block and bodybuilder configuration Electrical...

I'm not sure if I understood correctly. The Body builder guidelines (T6) chapter 2.5.3.3 has complete description of functions on all pins in all three plugs. Unfortunately the courtesy circuit (switched live and switched negative for the doors) is not wired into the plugs. A wiring diagram for...

...to the terminals of the main vehicle battery under the bonnet though I am wondering if the connection can be made at the "electrical interface for external connection - ls1" under the passenger seat (Australia) or other. Or do I need to route through to the main vehicle battery terminal under...

Having 3 separate battery systems on the go will complicate things and limit what products you can find, there are various charging/voltage converting devices out there that are designed to interface with 2 separate batteries but 3 ?? and even the ones that do 2 will generally prioritise one...

Good morning all, Sorry to bring this post alive again but I've looked back at this multiple times over the past 2 weeks when deciding what I'm doing with my electrics. Very good and informative but I have a couple of questions if somebody could assist. For my set up I plan to go with the...

As a novice with limited funds is there anyway I can use the "Electrical interface for external use" to connect electrical items to my leisure battery? Want to add a couple of 12v lighter sockets to connect a powered coolbox and charge phones for passengers in the back etc

Thanks for that, I thought I’d tested A9 today & i’m sure it was only high on cranking & went low once the engine started. I’ll check it again tomorrow. @Pauly, can you supply the cables?

I'm afraid the VCDS interface cable is "too" old - thus simply not capable of doing the maps. The blockmap functionality needs HEX-V2 or HEX-NET cables. Alternatively the maps could be done through VCDS > Engine > Adv. Meas. Values by ticking/saving/unticking 12 values at a time. The problem is...

Check this out Electrical interface...What is it for?

Hi Folks We are selling our 2017 102 Highline 83,000 miles FSH anything that has ever needed doing has been done,including cam belt /water pump also comes with a Pendle 150 bhp remap which really makes the van a smoother drive We have had the van from new ,although we are the second owner as...

You should have a pair connectors - where green/white is only on the one from Webasto. The most sophisticated way would be to add a pin to the other "van side"connector (vacant pin 1) --> https://www.t6forum.com/threads/webasto-auxiliary-heater-customizing.4933/post-228255 Could use so called...

..."Body builder guidelines: Transporter." --> Body builder guidelines: Transporter - BodybuilderDatabase Even in the portal there is no additional documentation about IS1 (although so referenced in the document). Linking another thread of same subject --> Electrical interface...What is it for?

Yes, my understanding is that the FL_7E0963272B__0009.frf firmware has the parking heater enabled by VW already. Thus, no Webasto unlock is necessary. If you have access to the VW flashing tools, that option is cheaper since no Webasto upgrade kit is needed. I doubt that the w-bus control units...

Victron (#TeamBlue) Advanced Systems + VRM - How We Done It - new thread started from - Seat Base Electric + EHU + Solar Install + Charger + DC-DC -- How We Done it -- previous content - Dellmassive’s "How I Done It" blogs. additional content - Solar Sheds & Other Non-t6 Solar Projects -...